Author Topic: toe bone punch  (Read 4493 times)

0 Members and 1 Guest are viewing this topic.

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
toe bone punch
« on: December 14, 2011, 09:01:59 am »
havent been knapping much. heres a piece that ive been working on, dacite. still need to finish it but i wanted to show it because i used a toe bone punch to remove the steep edge i had created trying to set up another series of platforms. the bone punch held up well and didnt need much dressing at all throughout the edge work. i'm going to set one up for notching and see how it holds up compared to antler. the blade was mostly hammer stone but i had to use a tine and billet a couple times to remove some nasty.







"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline Jimbob

  • Member
  • Posts: 871
Re: toe bone punch
« Reply #1 on: December 14, 2011, 11:24:49 am »
Good to hear from you again Jamie.  Good lookin blade!
You skin that smoke wagon and we'll see what happens!---Are you gonna do something? Or just stand there and bleed?

"Show me a man who will jump out of an airplane, and I'll show you a man who'll fight for his country."
Lt. General James Gavin

http://www.facebook.com/#!/jimmy.filidei

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: toe bone punch
« Reply #2 on: December 14, 2011, 12:11:02 pm »
Jamie, what we really need is some video lessons on how to make points and blades using all of these cool abo tools.  ;D
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Will H

  • Member
  • Posts: 2,120
Re: toe bone punch
« Reply #3 on: December 14, 2011, 06:19:00 pm »
Nice  8)
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: toe bone punch
« Reply #4 on: December 14, 2011, 10:20:04 pm »
Yes Sir!

That is pretty Blade!
What kinda toe bone was that?
Deer, Elk, Moose, or something bigger?

Thank You.

-gus
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,890
  • Eddie Parker
Re: toe bone punch
« Reply #5 on: December 14, 2011, 11:35:16 pm »
Nice, as usual, Jamie.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline bushman

  • Member
  • Posts: 282
Re: toe bone punch
« Reply #6 on: December 15, 2011, 02:24:02 am »
Nice blade Jamie. How did you go about using that toe bone punch? Thanks
Bushman

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: toe bone punch
« Reply #7 on: December 15, 2011, 02:21:11 pm »
thanks guys. the punch is a deer toe and justin after the holidays im going to start making some vids finally. bushman i use either a rock or a billet to strike the end of the punch. punches work great for just about any aspect of knapping but really comes in handy with thinning or working a bad edge when the piece is near completion. it allows you to focus as much as energy as you need into an area that would normally be tough to hit precisely with regular percussion. or if pressure flaking just isnt providingthe  force needed to remove a blemish or stubborn platform. once you learn to isolate platforms and the angle the punch properly you will be amazed at what can be done.
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline bubby

  • Member
  • Posts: 11,054
Re: toe bone punch
« Reply #8 on: December 15, 2011, 08:32:11 pm »
pesonally I'm glad your gonna do some video's, should be great abo learning, like to see Tower and Sawfiler do some as well, Bub
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline leapingbare

  • Member
  • Posts: 2,028
    • http://www.flintknappers.com/jessewright/
Re: toe bone punch
« Reply #9 on: December 15, 2011, 09:25:36 pm »
sweet blade Jamie. Vere nice!
 
Punch work is awsome once ya figer it out, takes a lot of practice like Jamie said ya got to have the plateforms and angle just right.
I Was doing a lot back when i was makeing those danish daggers, it was like learning how to knap all over again.
 I'll use them now from time to time really opens some doors on a stubborn rock.
Mililani Hawaii

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: toe bone punch
« Reply #10 on: December 16, 2011, 10:07:23 am »
Cool blade Jamie! looks like some nice rock..
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: toe bone punch
« Reply #11 on: December 16, 2011, 03:39:24 pm »
Pardon Sir,

One more question or two about the Deer Toe Bone punch.
Is the bone just dried naturally?
I'm guessing that you would want the full hardness of Raw bone?

Regards,

-gus
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline aaron

  • Member
  • Posts: 1,037
Re: toe bone punch
« Reply #12 on: December 17, 2011, 12:48:54 am »
very cool
can you show a pic of your holding position with the punch and biface?
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline Tower

  • Member
  • Posts: 2,296
Re: toe bone punch
« Reply #13 on: December 17, 2011, 01:24:48 am »
Great. Would love to see how you punch. There has to be a way to incorporate the technique for me.
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: toe bone punch
« Reply #14 on: December 17, 2011, 06:37:52 am »
the bone is air dried. moist bone shatters to easy so it must be dried. i will see if i can take a few pics today or maybe a quick vid later today. thanks again
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct