« previous next »
Pages: 1 2 [3]

Author Topic: Building a bow jigs  (Read 10626 times)

0 Members and 1 Guest are viewing this topic.

Offline Gus

  • Member
  • Posts: 1,829
  • It's Time To Make Some Shavings!
Re: Building a bow jigs
« Reply #30 on: July 26, 2011, 08:57:28 pm »
iowabow,

Its probably not that big a deal.

here is what I was talking about.

You and I built our cauls like drawing #1.
Gary Davis built his like drawing #2.

No worries... ;)

-gus
Logged
"I taught him archery everyday, and when he got good at it he throw an arrow at me."

Conroe, TX

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Building a bow jigs
« Reply #31 on: July 26, 2011, 10:53:27 pm »
It all depends on how big your clamps are either way will work
but allot less adjusting of clamp size if you go ahead and curve the backs too
Plus it squares the force a little more to the face of the curve so less sliding around and such!
Guy
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline iowabow

  • member
  • Member
  • Posts: 4,719
Re: Building a bow jigs
« Reply #32 on: July 27, 2011, 10:42:43 am »
Well the good news is that I did not glue the thing together.  I can take it apart and cut the other curve. The bad news is; (all newbies read this!!!!!!!) I put wheels on the bottom of the bandsaw to make it easy to move. But I was holding the table part and broke it off.  Now thirty dollars later I have parts on the way. NEVER MOVE by holding table top!!!
Logged
(:::.) The ABO path is a new frontier to the past!
Pages: 1 2 [3]
« previous next »