« previous next »
Pages: [1]

Author Topic: Hickory backed Red Oak  (Read 1708 times)

0 Members and 1 Guest are viewing this topic.

Offline HickoryBill

  • Member
  • Posts: 785
Hickory backed Red Oak
« on: January 26, 2011, 10:25:06 pm »
I've been thinking of building a hickory backed red oak? I've  been thinking 68 inches overall. 1.75 wide  fading to .5 - 3/8 tips? 50-55 @ 27? Any thoughts considerations? 
Logged
"He who hesitates usually misses"
"All you really need to make a bow and arrow are some sticks and a deer carcass"
Bill Stockdill
Clarion County Pennsylvania

Offline Dauntless

  • Member
  • Posts: 282
Re: Hickory backed Red Oak
« Reply #1 on: January 27, 2011, 12:32:04 am »
You could trap the hickory.  Otherwise it sounds like a perfectly fine combo.
Logged
The starving grad student with too many hobbies.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,543
Re: Hickory backed Red Oak
« Reply #2 on: January 27, 2011, 10:52:09 am »
Bill, that sounds like a good design. You could also go out from the fades 6" to 8" before tapering to the tips. I have made a few very nice hickory backed red oak boards. It is a pretty good combo. When you glue it up add about 3" of Perry Reflex. That should give you a flat profile after the bow is shot in.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline HickoryBill

  • Member
  • Posts: 785
Re: Hickory backed Red Oak
« Reply #3 on: January 27, 2011, 09:31:00 pm »
Thanks guys!!! As soon as I can get to a home depot I'll get a nice red oak board and get a hickory backing strip on the way!
Logged
"He who hesitates usually misses"
"All you really need to make a bow and arrow are some sticks and a deer carcass"
Bill Stockdill
Clarion County Pennsylvania
Pages: [1]
« previous next »