« previous next »
Pages: 1 2 [3]

Author Topic: Sinew and short bow questions FULL BRACE AND TILLERING QUESTIONS  (Read 11635 times)

0 Members and 1 Guest are viewing this topic.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Sinew and short bow questions FULL BRACE AND TILLERING QUESTIONS
« Reply #30 on: October 13, 2009, 08:56:34 am »
You can get 28" out of that bow but to do so you will have to make better use of the wood you have.
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline kylerprochaska

  • Member
  • Posts: 353
Re: Sinew and short bow questions FULL BRACE AND TILLERING QUESTIONS
« Reply #31 on: October 13, 2009, 10:04:42 am »
Marc do you mean getting the tips bending more? or deflexing the handle?

-Ky
Logged
GBR!

Offline Dano

  • Member
  • Posts: 1,349
Re: Sinew and short bow questions FULL BRACE AND TILLERING QUESTIONS
« Reply #32 on: October 13, 2009, 10:26:19 am »
I'd thin the tips down and get them bending more, if it were me.
Logged
"If the women don't find you handsome, they should at least find you handy."


Nevada

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Sinew and short bow questions FULL BRACE AND TILLERING QUESTIONS
« Reply #33 on: October 13, 2009, 10:27:21 am »
 I've been watching, there has been no need to comment since you have been getting great advice. But, If it was me, after adding the sinew and letting it cure, I'd scrape a little right at the beginning of the curves and to the bend. I think this would help open up the recurve and get it working a little more. And will probally give you a couple of more inches.

 I'm looking forward to seeing it finished.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Sinew and short bow questions FULL BRACE AND TILLERING QUESTIONS
« Reply #34 on: October 13, 2009, 10:28:34 am »
 Guess we were typing at the same time,Dano. :)
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Dano

  • Member
  • Posts: 1,349
Re: Sinew and short bow questions FULL BRACE AND TILLERING QUESTIONS
« Reply #35 on: October 13, 2009, 11:44:31 am »
Great minds think alike  ;D
Logged
"If the women don't find you handsome, they should at least find you handy."


Nevada

Offline 1776J

  • Member
  • Posts: 339
Re: Sinew and short bow questions FULL BRACE AND TILLERING QUESTIONS
« Reply #36 on: December 14, 2010, 01:02:20 pm »
Great bow!  I was just searching around on putting in recurve into a bow and stumbled onto this.
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Sinew and short bow questions FULL BRACE AND TILLERING QUESTIONS
« Reply #37 on: December 14, 2010, 05:51:55 pm »
I second that. That is gorgeous looking bow. How did this ever turn out?
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline aero86

  • Member
  • Posts: 1,263
Re: Sinew and short bow questions FULL BRACE AND TILLERING QUESTIONS
« Reply #38 on: December 14, 2010, 06:17:14 pm »
sure does look good to me!
Logged
profsaffel  "clogs like the devil" I always figured Lucifer to be more of a disco kind of guy.

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Sinew and short bow questions FULL BRACE AND TILLERING QUESTIONS
« Reply #39 on: December 15, 2010, 11:03:26 pm »
Man, I had forgotten about how this one was building....Kyler? Still curing out the sinew?  Can't wait to see this one finished, it should be quite the performer.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.
Pages: 1 2 [3]
« previous next »