hey fellas,
Grunt....the limbs are equally divided on these what makes it look different is that the bottom of the lever fade is part of the lever (non bending) but it appears the levers start where they get skinny......but I lay them out equal 1/2's and the lever fade goes above the line.
PatM.....speed and cast would be the same, if everything was equal. I'm differentiating between a high brace 50# shooting 500 grain arrows versus a 50#, low brace shooting 700-800 grain arrows. If both of those arrows leave the bow at realitively the same speed then the heavy arrow has more momemtum (cast). The greater weight (with the same launch velocity) will travel a farther distance. So when I shoot these bows down a long field I have noticed the same bow firing 500 grain arrows and 700 grain arrows if the design is efficeiently transferring energy the heavier arrows will often time fly farther than the lighter ones do....The bow is also quieter in the firing sequence because more energy is being transfered to the projectile. So while the two arrows may leave at about the same velocity the heavier arrow can still travel farther because of the sheer momentum that it has.
Dont know if I explained it right but I do believe there is an efficiency quotient in the mix that does make cast (distance traveled) different from speed (velocity of the missle). But that don't make my 2 cents worth anymore than anybody else's It is simply stating my thought process in judging weather or not my bows are efficient.....and why I put more weight on "distance traveled" than I do on launch velocity.