« previous next »
Pages: [1]

Author Topic: dogwood D bow dimensions ??  (Read 2039 times)

0 Members and 1 Guest are viewing this topic.

Offline sonny

  • Member
  • Posts: 742
dogwood D bow dimensions ??
« on: August 20, 2010, 07:17:34 pm »
just cut a 2-1/4" (at the top end, slightly larger at the bottom) dogwood sapling in order to make a
62" bend through the handle bow. got one stave that has a bit of reflex, the other a bit of deflex and
expect that I'll flip the tips on that one.
wondering how wide I should leave 'em such that I'll end up with a 45-50# at 26" bow.
seems that 1-3/8" should be plenty wide. does that sound about right ??


 
Logged
Never argue with an idiot. They'll drag you down to their level and beat you with experience.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: dogwood D bow dimensions ??
« Reply #1 on: August 21, 2010, 01:14:46 am »
Glenn, I haven't made a bow with dogwood yet. I have a few staves but just haven't gotten around to it.   I believe you can treat it like hickory and come out good. Steve Parker built a dogwood bow not long ago. It was a stiff handle though. I think I'd go 1 1/2" to start and narrow later if it is coming out too thin. You can scoop in on each side of the handle if needed for comfort.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline snedeker

  • Member
  • Posts: 907
Re: dogwood D bow dimensions ??
« Reply #2 on: August 21, 2010, 08:57:10 pm »
I think 1& 1/4 would do

Dave
Logged
Pages: [1]
« previous next »