« previous next »
Pages: 1 2 [3]

Author Topic: OBI recurve is done/finished pics  (Read 7144 times)

0 Members and 1 Guest are viewing this topic.

Offline Frode

  • Member
  • Posts: 400
Re: OBI recurve is done/finished pics
« Reply #30 on: February 15, 2010, 09:15:15 pm »
"Nuthin real fancy just functional."

That cracks me up   :D :D :D

Seriously, That is one beautiful bow!
Frode
Logged
If it doesn't rap the lintel, it might not be a longbow.

Offline Timo

  • Member
  • Posts: 2,026
Re: OBI recurve is done/finished pics
« Reply #31 on: February 15, 2010, 10:17:12 pm »
 Well thanks again to all who have giving such good comments.

Medicinewheel, I didn't take any pics of the process other than some early tiller pics. I plan on doing another one soon so I will take some pics for ya and show how I do the tips. nuthin toit. ;)

And as for my "nuthin fancy" comment. I was mainly going off of all the bows you guys post on here. Now them  is fancy! ;)
Logged

Offline horseapple

  • Member
  • Posts: 38
Re: OBI recurve is done/finished pics
« Reply #32 on: February 16, 2010, 11:14:41 am »
Your to humble Mr Ott, your attention to detail is beyond most, you and Gordan are quite the bowyers and inspire people to strive to that level.

friends in archery
JD
Logged

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: OBI recurve is done/finished pics
« Reply #33 on: February 16, 2010, 12:10:53 pm »
MAN!!!  I can't stop coming back and looking at this bow!!!  You did an amazing job, sir!   :)  -josh
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Rich Saffold

  • Guest
Re: OBI recurve is done/finished pics
« Reply #34 on: February 16, 2010, 12:55:41 pm »
Tim,  The bow looks real sweet. How hard was it to get the Ipe to bend around that curve? I'm just wondering if certain looking boards bend easier that others..

Rich
Logged

Offline DanaM

  • Member
  • Posts: 9,211
Re: OBI recurve is done/finished pics
« Reply #35 on: February 16, 2010, 01:26:24 pm »
Very nice Tim, its stunning :)
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

DCM4

  • Guest
Re: OBI recurve is done/finished pics
« Reply #36 on: February 16, 2010, 02:55:16 pm »
Another fine bow Tmo.

The backing is just plain sawn (or quarter?) osage, with ring violations?

I could see a plain sawn backing where you case the back ring, but just a flat backing I'm surprised it worked over ipe.
Logged

Offline Timo

  • Member
  • Posts: 2,026
Re: OBI recurve is done/finished pics
« Reply #37 on: February 16, 2010, 07:15:57 pm »
Thanks all,

JD, I just build bows and try to make them look the way I see them before I start. Putting me in the same sentence with Gordon? You make me feel beyond my capabilities. How bout  you slap some pics up of them cadillac bows you build?

Richard, With the kerfs sawn in it bent very easy.

Mims, The osage was quarter sawn. (or what I call 1/4) edge grain if you will?Actually it was from some of the slats I made last winter,I saved me some full length primo stuff just to try this out. The rings run end to end without waiver. Holding so far.
Logged

Offline brownhillboy

  • Member
  • Posts: 577
Re: OBI recurve is done/finished pics
« Reply #38 on: February 16, 2010, 10:33:54 pm »
Great looking bow!  I like the wood combo and the skins too.  I bet it's fast too!  Congratulations on a job well done! :)
Logged
south central VA

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: OBI recurve is done/finished pics
« Reply #39 on: February 16, 2010, 11:00:32 pm »
That is one beauty of a weapon Tim! I thought it was some kind of Star Wars bow at first glance with the OBI title ;D.
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline horseapple

  • Member
  • Posts: 38
Re: OBI recurve is done/finished pics
« Reply #40 on: February 17, 2010, 10:38:59 pm »
Looking forward to handling that little jewel at Ojam
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,870
  • Keep it flexible
    • Marc's Bows and Arrows
Re: OBI recurve is done/finished pics
« Reply #41 on: February 18, 2010, 10:50:42 am »
That's a really nice bow Tim, very unique
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Canoe

  • Member
  • Posts: 238
  • Progress - Not Perfection
Re: OBI recurve is done/finished pics
« Reply #42 on: February 18, 2010, 11:55:44 am »
Howdy TimO,

I too am very interested in seeing some pic.s and more discussion on how you kurfed the tips.  The tips are so thin at that point, I can't imagine how you were able to put one (much less two) kurf cuts into the tips.  ???

Pictures Please!!!

Oh, BTW, I really like this beautiful bow.  As someone else had said, it inspires the rest of us. :D
Thanks for sharing,

Canoe
Logged
"Nature is a mutable cloud which is always and never the same."  - R. W. Emerson

"Wilderness is not a luxury, but a necessity of the human spirit."    -Edward Abbey

Pdwight

  • Guest
Re: OBI recurve is done/finished pics
« Reply #43 on: February 18, 2010, 07:52:20 pm »
Great looking bow, I am a newbie so I have two questions. What type of glue did you use ont he limb tips ? and what is the hole for on the limb tip ??

Thanks
Dwight
Logged

Offline Timo

  • Member
  • Posts: 2,026
Re: OBI recurve is done/finished pics
« Reply #44 on: February 19, 2010, 12:00:28 am »
Thanks again folks.

Canoe, I plan on doing a little picture thingy sometime on how I do my kerfs. Patience grasshopper! ;)

Pdwright, I use CA glue,(industrial super glue) I use the 25 second set,but about any will work. The hole in the limb tip is for a string keeper.

Logged
Pages: 1 2 [3]
« previous next »