Author Topic: Help with First Warbow Please  (Read 3400 times)

0 Members and 2 Guests are viewing this topic.

Offline deerhunter97370

  • Member
  • Posts: 374
Help with First Warbow Please
« on: March 04, 2010, 12:15:41 am »
I will be starting a warbow in the Spring (I need a new hunting bow first) Im going to use a 6 foot Pacific Yew stave. So I was wondering what width I should have it for about a 125# bow. Thanks for any advice. Joel
« Last Edit: March 04, 2010, 12:34:31 am by deerhunter97370 »
Always be ready to: Preach, Pray, or Die. John Wesley

Offline Yeomanbowman

  • Member
  • Posts: 283
    • warbowwales
Re: Help with First Warbow Please
« Reply #1 on: March 04, 2010, 09:41:11 am »
With a 6' stave (and you will loose a couple of inches with the horn nocks) you are going to get some serious set or worse at 125.  Can you get a longer stave?

Offline deerhunter97370

  • Member
  • Posts: 374
Re: Help with First Warbow Please
« Reply #2 on: March 04, 2010, 01:06:02 pm »
Maybe Ill be able to get a longer stave next year. But thats what Ive got for now.
Always be ready to: Preach, Pray, or Die. John Wesley

Offline Et_tu_brute

  • Member
  • Posts: 74
Re: Help with First Warbow Please
« Reply #3 on: March 04, 2010, 02:57:05 pm »
About 1 1/2" would be a good starting point, though I'd rough out to being a bit more than that (say 1 3/4") then gradually reduce the width as you get the bow down to the right weight and tiller.

Offline deerhunter97370

  • Member
  • Posts: 374
Re: Help with First Warbow Please
« Reply #4 on: March 05, 2010, 02:47:31 am »
Thanks for the advise Yeomanbowman and Et tu Brute. I think Ill try the 1 1/2" width and see what I get. Wish me luck.
Always be ready to: Preach, Pray, or Die. John Wesley