« previous next »
Pages: [1]

Author Topic: Staining Buckskin for a handle grip  (Read 3869 times)

0 Members and 2 Guests are viewing this topic.

Offline hedgeapple

  • Member
  • Posts: 1,835
Staining Buckskin for a handle grip
« on: January 11, 2010, 05:05:51 pm »
I have a problem hopefully, some you can give me some suggestions.  I egg tanned a deer hide.  It's nice and soft, almost to a chamoise cloth feel.  I want to use it for a handle wrap for my bow.  But, I think it's actually too soft and too moisture absorbant.  Staining is easy, but I want to add some stiffness and some water repellant qualities to the hide.  What woud be your suggestions?
Logged
Dave   Richmond, KY
26" draw

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: Staining Buckskin for a handle grip
« Reply #1 on: January 11, 2010, 05:17:53 pm »
Beeswax......I have taken Brain Tanned Deer Hide...and heat beeswax up and rub it into the Hide...when it hardens ...it stiffens the Hide up and waterproofs it in the Process....JMO
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline hedgeapple

  • Member
  • Posts: 1,835
Re: Staining Buckskin for a handle grip
« Reply #2 on: January 11, 2010, 05:33:57 pm »
El, would I wrap the handle with the buckskin while the beeswax was drying?  I'm needing the buckskin to shrink around the handle.
Logged
Dave   Richmond, KY
26" draw

Offline artcher1

  • Member
  • Posts: 1,114
Re: Staining Buckskin for a handle grip
« Reply #3 on: January 11, 2010, 05:45:48 pm »
Rubbing in some Tite-bond III wood glue would give you a good water resistant grip. It'll stiffen the leather somewhat also. ART
Logged

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: Staining Buckskin for a handle grip
« Reply #4 on: January 11, 2010, 06:06:52 pm »
I have never tried to make it shrink on the Bow before...I have put the Beeswax on with a Hairdryer...to make sure that it soaks all the way through the Deerskin...then sewn it on while it was still warm...and when it dried...it was a snug fit and it hardened some up when the wax set....maybe the Titebond would work better...may shrink it more...I do not know that for sure though
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline hedgeapple

  • Member
  • Posts: 1,835
Re: Staining Buckskin for a handle grip
« Reply #5 on: January 11, 2010, 07:36:04 pm »
El, thanks for your honesty.  :)
Art, I was just looking at TBIII thinking about using it.  I guess I'll need to experiment on some scrap piece to find what I like.  Thanks for your all's in put.
Logged
Dave   Richmond, KY
26" draw

Roger

  • Guest
Re: Staining Buckskin for a handle grip
« Reply #6 on: January 11, 2010, 11:00:34 pm »
Mix a whole box of strong Tea (tannins) in just enogh water to cover. Put the hide in and wait. Keep it in the house or garage and you'll have stiffer ( kinda bark tanned) leather in bout a week. Normally takes about a month to tan through. It will also stain the leather a med brown.

R.
Logged

Roger

  • Guest
Re: Staining Buckskin for a handle grip
« Reply #7 on: January 11, 2010, 11:07:03 pm »
Here's one I did a few years back.


Logged

Offline hedgeapple

  • Member
  • Posts: 1,835
Re: Staining Buckskin for a handle grip
« Reply #8 on: January 12, 2010, 01:33:37 am »
Roger, beautiful work.  I love the beads.
Logged
Dave   Richmond, KY
26" draw

Roger

  • Guest
Re: Staining Buckskin for a handle grip
« Reply #9 on: January 12, 2010, 07:27:36 pm »
Thanks...come to think of it mine was a raw hide. Yours should still take some stain. Have you smoked it to waterproof it yet. If not it should take the tannins.

R.
Logged

Offline hedgeapple

  • Member
  • Posts: 1,835
Re: Staining Buckskin for a handle grip
« Reply #10 on: January 12, 2010, 09:25:00 pm »
Roger, no I haven't do anything to stain the buckskin.  It still a pretty off-white.  But, I've decided to go with rawhide for the grips.  I just wasn't getting the results fromt he buckskin I wanted.  And, I'm too impatient to wait a week or two to see if I would like the tea stained buckskin.  :)
Logged
Dave   Richmond, KY
26" draw

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: Staining Buckskin for a handle grip
« Reply #11 on: January 13, 2010, 04:03:44 am »
Quote from: artcher1 on January 11, 2010, 05:45:48 pm
Rubbing in some Tite-bond III wood glue would give you a good water resistant grip. It'll stiffen the leather somewhat also. ART

I had tried that before, and it came off in one! Are you sure this works??

Roger, that quiver is really nice!!!
Logged
Frank from Germany...

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,206
  • if you have to ask you wouldn't understand ,Tenn.
Re: Staining Buckskin for a handle grip
« Reply #12 on: January 13, 2010, 08:13:39 am »
Heavy smoking will give it some waterproofing quality's.Then I would just cut it to size dry,then take a 1/8 of an inch or so off the with,then wet it,stretch it and sew to the handle.It will shrink up tight on the handle.That is how I do it.The smoke will make it a light brown. :) It should dry a little stiffer also. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good
Pages: [1]
« previous next »