Author Topic: Granadillo?  (Read 3274 times)

0 Members and 1 Guest are viewing this topic.

Offline jthompson1995

  • Member
  • Posts: 282
  • Parkville, MD
Granadillo?
« on: December 28, 2009, 10:33:31 pm »
Has anyone used granadillo for a bow? I was in woodcraft for a couple things today and saw a dead straight grained quarterswan board of granadillo about 7/8"x6"x10'+ and throught it would make a gorgeous bamboo backed bow. I searched the web and found the SG to be .79 to .9. I searched this site and the web and could not find another bow made with granadillo other than as a riser wood.

So all the numbers look good except the price, the board is over $70 but I could probably get 5-6 bows from it. I just wanted to see if any one has had good, bad or otherwise experience with it as a bow wood before I decide whether to lay out that kind of moolah. Thanks in advance for any info.
A man who works with his hands is a laborer, a man who works with his hands and his mind is a craftsman, but a man who works with his hands, his mind and his heart is an artist. - Louis Nizer (1902-1994)

Offline jthompson1995

  • Member
  • Posts: 282
  • Parkville, MD
Re: Granadillo?
« Reply #1 on: December 29, 2009, 10:29:41 pm »
Wow, I guess this may be a new wood to just about everyone.  Here's some othe info I found:

Granadillo: Also known as Coyote and Macawood – (Platymiscium yucatanum).       

Its heartwood is bright brick red with purplish brown tones. Faint stripes of slight reddish brown give it a  bit of character; darker samples look almost waxy with a clearly white boundary that identifies the sapwood. The texture is mostly uniform and fine. This species is a woodworker’s dream. The wood carves very easily, is easy to saw, has good planning properties, sands easily giving clean smooth surfaces and has excellent polishing characteristics. The species has exceptionally high bending strength properties in the air-dry condition at about 12 percent moisture content and is stronger than, for example Hard Maple, White Oak or Teak. It’s even superior to Teak or even Mahogany. Bending strength: Green 18,338 Dry 21,670 psi. Density is 63 lbs/ft3. Hardness: 2,406 lbs. Max. crushing strength: Green 8,674, Dry 12,093 psi. Specific gravity green 0.79. Janka side hardness at 12 percent content ranges from 1,710 lb. to 3,200 lb. Some uses for Granadillo is for billiard-cue butts, cabinetmaking, decorative veneer, fine furniture, joinery, musical instruments such as violins and bows, drum sticks, organ pipes and xylophones, pianos and piano keys. The heartwood is highly resistant to attack by decay fungi, insects and dry-wood termites. With its natural rot resistance it could last from 15 to 25 years in contact with the ground without chemical protection.

This info looks pretty good, especially good strength at 12% MC since I live where summers are humid. I might save up a little extra cash and head back to see if I can get the board.
A man who works with his hands is a laborer, a man who works with his hands and his mind is a craftsman, but a man who works with his hands, his mind and his heart is an artist. - Louis Nizer (1902-1994)

Offline zeNBowyer

  • Member
  • Posts: 649
Re: Granadillo?
« Reply #2 on: December 29, 2009, 11:12:18 pm »
Wow  that  IS  a  beautiful  wood-



[attachment deleted by admin]
"There's  something  immoral  about  abandoning  your  own  judgement"
Cowards always run in  packs
Ishi did not become the arrow, I suspect. The arrow became Ishi.

Offline NTD

  • Member
  • Posts: 1,771
Re: Granadillo?
« Reply #3 on: December 29, 2009, 11:42:50 pm »
They always have coyote at my local Woodworker's Source and it IS VERY PRETTY but never found a straight grained piece.  If you decide to try your hand with it please please please post pics.
Nate Danforth

Offline Badger

  • Member
  • Posts: 8,124
Re: Granadillo?
« Reply #4 on: December 30, 2009, 04:31:58 am »
  Jthompson, I made a beautiful recurve from grenadillo several years ago, I coppied the Mark St louis style and it worked very well. I don't remember now how I bent the curves, it seems to me that I used staem but I am not positive. I know I did like the wood very much, if felt a lot like osage to work with. As far as being coyote wood, I don't think so, the coyote wood I have seen is a different color and tends to chysal, not any worse than Black locust but very similar. Steve