« previous next »
Pages: [1]

Author Topic: Quick Release for a Bandsaw Fence  (Read 2110 times)

0 Members and 1 Guest are viewing this topic.

Offline OldBow

  • Member
  • Posts: 2,216
  • I'm just an old retired biology teacher.
Quick Release for a Bandsaw Fence
« on: December 18, 2009, 05:17:23 pm »
I use my bandsaw for everything from cutting frozen salmon to resawing lumber.
I especially need it to cut strips for bow laminations.
I never had a good fence before this idea out October, 2009 isssue of WOOD magazine.
Works really well. The clamp is easily removed and the fixed jaw re-attached to the tool for standard clamping.
The far end piece is a cleat that hangs down the backedge of the table.
Everything made from scraps.


[attachment deleted by admin]
Logged
When you're retired, every day is Saturday

Offline Jesse

  • Member
  • Posts: 2,129
Re: Quick Release for a Bandsaw Fence
« Reply #1 on: December 18, 2009, 05:33:48 pm »
Great idea. I have a fence but my neighbor doesn't on his. I'll show it to him
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,543
Re: Quick Release for a Bandsaw Fence
« Reply #2 on: December 18, 2009, 05:40:16 pm »
Cool idea, Don. The fence on my saw is a joke. I'll give this a try.  Thanks!
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline canidsong

  • Member
  • Posts: 20
Re: Quick Release for a Bandsaw Fence
« Reply #3 on: December 18, 2009, 08:03:57 pm »
nice work.

it seems these days they make a jig and a tool for everything. to think i could have paid attention when older folks tried to show me how to do things right, it wouldn't have taken me as long to learn what i have.

my saw came with a quick release fence. it is probably the saw's only reliable feature :D
Logged

Offline OldBow

  • Member
  • Posts: 2,216
  • I'm just an old retired biology teacher.
Re: Quick Release for a Bandsaw Fence
« Reply #4 on: December 18, 2009, 08:51:34 pm »
You use the cross pins on the clamp like this:

[attachment deleted by admin]
« Last Edit: December 18, 2009, 08:58:06 pm by OldBow »
Logged
When you're retired, every day is Saturday

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Quick Release for a Bandsaw Fence
« Reply #5 on: December 18, 2009, 10:15:17 pm »
Nice....
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Grunt

  • Guest
Re: Quick Release for a Bandsaw Fence
« Reply #6 on: December 18, 2009, 11:59:10 pm »
Nice to learn something new every day. Thanks for posting this cool tool.
Logged

Offline Badger

  • Member
  • Posts: 8,119
Re: Quick Release for a Bandsaw Fence
« Reply #7 on: December 19, 2009, 12:16:15 am »
   Don, I have a fence for my bandsaw but never use it for resawing thin strips because most bandsaws have a certain amount of run out. I use a V with the point right next to the blade. I move the point of the V away from the blade just the thickness of the lam I am cutting. It is very rare that I feed the board through straight, it is almost always a slight angle depending on the grain of the wood. If I do find I can push it through straight I switch to my fence. Fot a v I usually just use a 2X4 and lay it on my saw table at an angle so one of the corners is closest to the blade, then clamp it down. Steve
Logged

Offline Michael C.

  • Member
  • Posts: 576
Re: Quick Release for a Bandsaw Fence
« Reply #8 on: December 19, 2009, 05:27:33 am »
I was just trying to figure out how o make one of these, thanks.
Logged
"Friendship makes prosperity more shining and lessens adversity by dividing and sharing it."

Cicero

Offline Tom Leemans

  • Member
  • Posts: 524
Re: Quick Release for a Bandsaw Fence
« Reply #9 on: December 19, 2009, 02:22:23 pm »
Cool!
Logged
Pages: [1]
« previous next »