« previous next »
Pages: [1]

Author Topic: Tillering strings  (Read 2236 times)

0 Members and 1 Guest are viewing this topic.

Offline Craig/Fl

  • Member
  • Posts: 30
Tillering strings
« on: June 21, 2009, 05:28:32 pm »
For those of you that make your own could you post a picture or give a description of have you made it, I was planning on using my bow stringer but its just to small on one end. Thanks.
Logged

Offline Dauntless

  • Member
  • Posts: 282
Re: Tillering strings
« Reply #1 on: June 21, 2009, 05:32:52 pm »
I use a very long flemish twisted string with about 16 or so plies of B50.  I have a loop on one end and make timber hitches for the other.
Logged
The starving grad student with too many hobbies.

Offline Kegan

  • Member
  • Posts: 2,676
Re: Tillering strings
« Reply #2 on: June 21, 2009, 05:34:10 pm »
It's jsut a piece of parachute cord. It has a loop knot at one end and a timber hitch at the other. Lasts indefinately and it took a gradn total of thirty seonds to make ;D.
Logged

Offline sulphur

  • Member
  • Posts: 321
Re: Tillering strings
« Reply #3 on: June 21, 2009, 05:48:54 pm »
http://www.geocities.com/salampsio/flemish1.htm
sam harper has a decent string build along.  i also use a flemish loop on one end and a timber hitch on the other.  remember its adjustable so don't tie it too long when tillering.  its harder to see flaws with a really long string.  should hang down an inch or two.
Logged

Offline Craig/Fl

  • Member
  • Posts: 30
Re: Tillering strings
« Reply #4 on: June 21, 2009, 07:26:33 pm »
  Boy was I getting ready to over think this, thanks guys, you saved me a bunch of time !!. Craig
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Tillering strings
« Reply #5 on: June 21, 2009, 10:23:08 pm »
For the long string I use sash cord. For tillering I use old bow strings. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: [1]
« previous next »