Author Topic: unbacked washington state maple board  (Read 3775 times)

0 Members and 1 Guest are viewing this topic.

Offline snedeker

  • Member
  • Posts: 905
unbacked washington state maple board
« on: May 08, 2009, 04:56:54 pm »
Wood I got from Brian Melton a couple years ago.  Edge grain.  65" ntn, 67#/28".  1&13/16" wide out past mid limb, to 3/8 tips at nock.  Guatemalan mahogany handle.  8" between handle fades.   Board was touch under 1" and I have a nice backing strip ripped off too.  Piece was 11/16 thick at start.  Brown osage tip overlays.   Heated in 2" reflex, and it has about 1/2" set after very little shooting.  A ripper.   Maple stained with a coat of colonial maple and a coat of red mahogany, then urethane.   I had it just about full tillered at 80# and brought it down by some narrowing and belt sanding.  Impressive wood.  Less than 1/2" thick at fades.   I am still pondering handle covering.

Dave

[attachment deleted by admin]

Aosda

  • Guest
Re: unbacked washington state maple board
« Reply #1 on: May 08, 2009, 06:37:00 pm »
Looks great.  I'm not sure if I would cover that nicely contrasting handle.  Maybe pad the palm side with built up leather. Maybe wrap the handle with pale leather, make some type of see through area to show off the color the mahogany.

Offline Timo

  • Member
  • Posts: 2,026
Re: unbacked washington state maple board
« Reply #2 on: May 08, 2009, 06:47:10 pm »
Saaa wweeett bow! I like it alot.Very nice job.

I have some edge grain hickory boards that I've been pondering on,you may have made up my mind. ;)

Offline OldBow

  • Member
  • Posts: 2,216
  • I'm just an old retired biology teacher.
Re: unbacked washington state maple board
« Reply #3 on: May 08, 2009, 07:31:06 pm »
Very, very nice. Go snedeker! A steady participant in PA and I have voted for his bows many times. At the end of May, we'll look at this bow again.
When you're retired, every day is Saturday

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: unbacked washington state maple board
« Reply #4 on: May 08, 2009, 07:45:26 pm »
That's a great looking bow. Nice job. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

brian melton

  • Guest
Re: unbacked washington state maple board
« Reply #5 on: May 08, 2009, 09:31:30 pm »

        Nice job Dave!! 3-4 yrs ago I sent out tons of wood, makes me wonder where it is all at?? ;D

Offline mspink

  • Member
  • Posts: 213
Re: unbacked washington state maple board
« Reply #6 on: May 08, 2009, 09:43:24 pm »
nice bow, i love maple
Aim small miss small!

Offline snedeker

  • Member
  • Posts: 905
Re: unbacked washington state maple board
« Reply #7 on: May 09, 2009, 03:58:13 pm »
Glad you like the mahogany dude. Brought it back from Guatemala in 1991

Dave

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: unbacked washington state maple board
« Reply #8 on: May 09, 2009, 05:03:06 pm »
Nice bow Dave.  Maple is good bow wood

Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline Knocker

  • Member
  • Posts: 271
  • Tumwater, Washington
Re: unbacked washington state maple board
« Reply #9 on: May 11, 2009, 12:47:13 am »
Hey Brian,

I assume that was a Vine Maple stave?  Or were you selling/trading boards at some point?

Keith
If ye love wealth better than liberty, the tranquility of servitude
better than the animating contest of freedom, go home from
us in peace. We ask not your counsels or arms. Crouch down
and lick the hands which feed you. May your chains set
lightly upon you, and may posterity forget ...

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,136
  • if you have to ask you wouldn't understand ,Tenn.
Re: unbacked washington state maple board
« Reply #10 on: May 11, 2009, 09:38:35 am »
Beautiful bow,very well done. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline snedeker

  • Member
  • Posts: 905
Re: unbacked washington state maple board
« Reply #11 on: May 11, 2009, 04:41:45 pm »
Thanks.


Knocker:  Brian had a lot of Rock maple (sugar maple really) lumber there for a while.  Thats what this is.

Dave

brian melton

  • Guest
Re: unbacked washington state maple board
« Reply #12 on: May 11, 2009, 10:27:47 pm »
Keith,

                       Can't sell things here. I do other places occasionally, but no where near like I use too. If you need something I am sure we can work a trade......got that pipestone yet???