Hi Scrub Buster
The first step in a major journey ....
![Grin ;D](http://www.primitivearcher.com/smf/Smileys/default/grin.gif)
Are the two photos the same , or have you taken some wood off between the shots ?
Photo 1 looks like a hinge starting at block 4 on left , outer half of right limb needs to bend more
Photo 2 left limb looking better , maybe a touch more bend at fade out and watch for too much bend in block 5 , right limb watch for hinge between block 2-3 and block 3-5 needs more bend
thin the tips down a bit , they look a bit chunky
Just take it slowly
This is a tool I find helps a lot with tillering , you slide it along the belly when the bow is pulled and it marks the spots that you need to remove wood , and the spots that are not marked are left alone
Its a piece of wood with a hole drilled in the middle that fits a pencil and a larger hole counter sunk to hold a nut , that the pencil will screw into , so that the hight can be adjusted
![](http://i278.photobucket.com/albums/kk87/africanman2/bow%20tools/DSCN1131.jpg)
![](http://i278.photobucket.com/albums/kk87/africanman2/bow%20tools/DSCN1132.jpg)
![](http://i278.photobucket.com/albums/kk87/africanman2/bow%20tools/DSCN1133.jpg)
Chris
![Wink ;)](http://www.primitivearcher.com/smf/Smileys/default/wink.gif)