« previous next »
Pages: [1]

Author Topic: How wet for rawhide backing?  (Read 3526 times)

0 Members and 1 Guest are viewing this topic.

Offline TreyNC

  • Member
  • Posts: 121
How wet for rawhide backing?
« on: January 10, 2009, 03:17:45 pm »
On another thread about rawhide backing I saw where Hillbilly said "just dampen the hide and put it on", I have always soaked my rawhide completly for a couple of days before gluing on. I don't remember why I started doing it this way, but it works and didn't want to fix something not broken ya know. Who dampens it and who thoroughly soaks it before applying? Any pros and cons? I didn't want to jack the other thread I saw, so what do ya say?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: How wet for rawhide backing?
« Reply #1 on: January 10, 2009, 04:23:40 pm »
I soak rawhide thoroughly too but can do that in a matter of 15 minutes. After it is pliable I remove any excess water add the glue to the rawhide and bow back and lay them up. If you keep it in water for too long there is a chance for it to rot or spoil. Just enough to get it pliable is all it takes.    Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline TreyNC

  • Member
  • Posts: 121
Re: How wet for rawhide backing?
« Reply #2 on: January 10, 2009, 04:49:08 pm »
I usually change the water several times a day and sometimes keep it in the fridge.
Logged

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: How wet for rawhide backing?
« Reply #3 on: January 10, 2009, 10:34:11 pm »
Trey, my version of "dampen" would be to soak it in warm water for a half-hour or so. You don't want it slimy wet, just pliable.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: How wet for rawhide backing?
« Reply #4 on: January 10, 2009, 10:52:23 pm »
What Pat and Hillbilly said ...soak it long enough to get it pliable.....and get it out of there...if it gets slimy it wont hold...if it sits too long it will spoil
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline lowell

  • Member
  • Posts: 939
Re: How wet for rawhide backing?
« Reply #5 on: January 11, 2009, 12:04:09 am »
Seems 15-20 minutes works for me.
Logged
My son says I shoot a stick with a stick!!

Offline Lost Arra

  • Member
  • Posts: 121
Re: How wet for rawhide backing?
« Reply #6 on: January 12, 2009, 12:58:38 pm »
Don't try to speed up the soaking process by using hot water.
It cooks the rawhide.
Don't ask me how I know this :o
Logged

Offline Gordon

  • Member
  • Posts: 3,299
Re: How wet for rawhide backing?
« Reply #7 on: January 12, 2009, 02:08:22 pm »
15-30 minutes in warm (not hot) water will generally do the trick.
Logged
Gordon

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,206
  • if you have to ask you wouldn't understand ,Tenn.
Re: How wet for rawhide backing?
« Reply #8 on: January 13, 2009, 06:11:42 am »
What most have said above,15/20 min.will do it,dry if off and glue it on. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good
Pages: [1]
« previous next »