Primitive Archer
Main Discussion Area => Bows => Topic started by: ccase39 on March 10, 2019, 01:26:31 am
-
What design was most widely used by the Native Americans. What are some of the different designs different tribes used?
-
Tough one to answer. Likely a toss-up between the simpler D bow and the short double curved gull wing style
-
Tough one to answer. Likely a toss-up between the simpler D bow and the short double curved gull wing style
Do you know what tribes used what designs? I’m assuming the Lakota style bow was what the Lakota used. Is that correct?
-
Jim Hamm and Steve Allely's books about Native American bows, arrows and quivers has pencil drawings with dimensions of Native American bows from each region.
-
Tough one to answer. Likely a toss-up between the simpler D bow and the short double curved gull wing style
Do you know what tribes used what designs? I’m assuming the Lakota style bow was what the Lakota used. Is that correct?
Broadly speaking, D bows to the East and double curved through the Mid-West Many Western tribes also started off in the Woodlands closer to the East and changed things up as they migrated West.
One could probably assume Lakota used what is thought of as typical Lakota design. ;) As did every other tribe in the same area.
-
It really depends on whether or not the bow was backed or not. Having said that, our bows ranged from either D or Gull wing. It is largely dependent on the maker. Although many northern tribes have very similar styles and dimensions.
-
It really depends on whether or not the bow was backed or not. Having said that, our bows ranged from either D or Gull wing. It is largely dependent on the maker. Although many northern tribes have very similar styles and dimensions.
A Native American buddy of mine said they would bury the wood and spread coals over it to heat treat. Have you ever tried this?
-
No, I haven’t tried this method. However, I have shaped bows green and let them season a little before either sinewing or finishing as a self bow. Seems like a viable option though
-
It really depends on whether or not the bow was backed or not. Having said that, our bows ranged from either D or Gull wing. It is largely dependent on the maker. Although many northern tribes have very similar styles and dimensions.
A Native American buddy of mine said they would bury the wood and spread coals over it to heat treat. Have you ever tried this?
Frequent mention is made of that method to steam a whole bow but I've never heard of it as an authentic reference to heat treating.
The bow would be buried and have wet earth placed over it before the fire was built. Then the bow could be unearthed and easily shaped.
-
there are so many variations, its fascinating,the horn bows are cool too,,I like to make the bows that are Ishi inspired,,I think they are relatively easy to make,, and are effecient,, and can be sinew backed too,,