Primitive Archer
Main Discussion Area => Bows => Topic started by: jasper on April 02, 2008, 05:49:43 pm
-
I want to try steaming reflex into the handle of a ash flatbow. My question is where do I apply the steam to? Do I steam the handle area or somewhere in the limbs. Probably a stupid question. I will be using the kitchen stove. Thanks for the info.
-
Anyone that can help?
-
you want to induce reflex in the handle? why? usually, reflex will be induced in the limbs. the only time i've induced reflex in the handle, was with a spliced handle joint. remember, dry heat with dry wood, and steam with green wood.
-
Maybe worded wrong. I want to sinew the bow and want to add reflex to the bow. What area do I apply the heat to? Thanks
-
If the wood is already well seasoned, use dry heat such as with a heat gun or stove burner. Add the reflex to the limbs, preferably by using a form and heating a section of the limb at a time starting just out from the fades and working your way clamping as you go to the tips. The form has reflex in it, with the bow back to go against the form. Use shims when clamping against the belly to the form. Get the wood hot to the point of not being able to hold your finger against the wood. Allow to cool before removing from the form. The bow should be first clamped to the form at the handle prior to starting the heat treatment.
Apply the sinew after reflex has been introduced.
-
If you want to add reflex to a bow that is going to be sinewed, let the sinew draw it into reflex. You can assist it by stringing the bow backwards before you add the sinew. In my experience, after 2 to 4 weeks or so there will be no tension on the string because the sinew is doing its work. Pat