Primitive Archer
Main Discussion Area => Bows => Topic started by: 0ri9ine11 on May 30, 2018, 11:59:25 am
-
So I am currently building a horsebow out of Rattan Manau. I don't know how popular that idea is around here, but over at fletchers corner it got quiet famous because its such a nice "light version" of an actual hornbow.
I'm planning to face it with american walnut, but tiller it as good as possible beforehand. I scraped the Manau down to about 13-15mm and strung that whole thing to braceheight. I gave it a careful littl pull and had to notice it was extremely easy to pull. Even though I am going to face it I'd still like it to be a little strong in of its own.
So I took the heat gun and roasted the belly. (at this time around 2-3 times on both limbs) After every heat treatment I noticed the limbs got quiet a lot harder to bend and it was noticable harder to string as well.
But as soon as it was at braceheight... boom poundage gone! Feels like 5 pounds. Now I have never pulled a recurved bow or one with siyahs before. Anybody got an idea? ???
-
Because this is not a horn bow I'm going to move this to "Bows" for better visibility.
-
aight. sorry I wasn't sure :-[
-
Are you sure nothing broke? Like a fret?
-
jup everythings normal
-
Wait, so you got the string on and it lost pundage?
-
When you say "face" it with Walnut do you mean "back" it with walnut? If so a backing will increase the draw weight quite a bit, more than you expect. I've never used Walnut for a backing so I have no idea how well it will work.
-
no I mean walnut on the belly. Manau is not something that can make use of a backing, since its only problem is compression and a lot of set
-
A belly lam will probably still increase the draw weight but I'm venturing into guesswork now ;D ;D
-
@Ryan jacobs
I mean at least it feels like it. or more specifically: the pundage when strung didn't increase while it got harder and harder to string and bend by hand :o
-
Well, it really doesn’t matter if you’re adding a belly lam, that’ll add a couple pounds.