Primitive Archer
Main Discussion Area => Flintknapping => Topic started by: paulc on May 02, 2018, 07:15:17 am
-
This was a pretty nice if slightly unbalanced notched point...it looked really pretty good. :-K
P
-
Two thumbs up for that one Paulc.👍👍
Bjrogg
-
You are off and running. It keeps getting better every time you chip.
WA
-
Lookin good man.
-
I have a pile of flakes from my efforts at reducing my large spalls to nothing but flakes :-) So picking at all of them as I can, 10 min here and 30 min there. Some obsidian, georgetown, a random flake from Eddie, and middle right is a piece of much smaller than I purchased it Flint Ridge.
-
Yup, you are really coming along. I like how you are visualizing that center line, Paul. Keep at it!
-
A lot of progress, Paul, those look good. If you look at the edge on the first point you can see some small deltas. You could grind those and run some more flakes and straighten the edge at the same time.
-
Still not the art work that most of you post but best I can do. I like the glass one the best; the two stone ones could use some more touch-up. Maybe if I decide to put them on the end of an arrow...still plenty of flakes to keep me away from proper stones:-)
-
Good work and good progress. Don't ever give these early ones away. You will remember them later and wish you could take another look at them.
WA
-
haft and shoot them
you will know if they are good
-
Looking good Paul.
-
Getting better each time you post.
-
Most recent results, probably too heavy to put on an arrow ill give it a try anyway and see how they shoot.
Paul
-
Nice work.
-
Wow, in under a month you improved so much. How did you do it?
-
I have wasted a lot of rock Ryan :-) I have gone through probably $150 worth of purchased stone over the last 6 months and have perhaps 6 legit preforms to show for it. All the rest of my purchased stone has been reduced to debitage (however you spell that). Which makes great general purpose arrowheads but not the artwork we often see on here.
So break a lot of stone which I am sure you've heard. I don't work anything to completion (in one sitting) lately. I pick for perhaps 10 or 20 min on a piece and then set it aside and pick at another piece. Otherwise I get impatient and careless and rush and blow up the piece. And lately I've been able to work on stone at least three nights a week after work. Might only be for 30 min but I take the time to sit outside and pick a bit before going inside. Plus on the weekend while the wife is sleeping in. I got serious about grinding platforms-I don't take more than 4 or 5 flakes before grinding again-depending on circumstances. I have a grinding wheel that I have laying on my table-I hold my piece against that and grind either the whole edge(at the beginning) or just part if I am getting close to finishing a point(2 or 3 flakes only). And if I find I don't really care if a flake goes well I stop working on that piece.
If there is anyway you can get together with someone who knows more than you I highly recommend it. Neither Stephen or Eddie shared any earth shattering insight into knapping but the time spent watching someone who knows what they are doing and being able to ask questions before and after a flake in real time is REALLY helpful. And they were both simply good company :-)
And I have a long way to go-I can make a serviceable hunting point I guess but zip beyond that...Paul
-
Hmm... Getting help here in the Philippines is difficult. I do know that the natives here used obsidian, dacite, and jasper. Only problem is no one decided to continue flintknapping after the stone age. The last time I’ve met the natives was when I was too young to ask... Oh well, guess I’ll get back to breaking some low quality rock ;D
-
Philippines would be tough...treat yourself to some obsidian if you can swing the shipping charges. Or get some glass from the dump.
Another thought-I had to get over making something awesome right out of the gates...Patience and "zen" (at risk of being flaky-pun intended)...it is very much a in the moment kind of thing like so much of life. gotta be present with the flake you are trying to pop right then...preacher out
-
That last one on the right is really looking good, Paul. I can see you pushing a flake centerline and the straight lines of your edges as well as length is improved. You are building up a lot of steam quickly...good for you buddy!
-
What Steve said, and you should have grabbed more rock when you were here.
-
Summers are brutal with work so little time to knap but camp is over and I can finally come up to breath! I did manage to pick out a couple of points...time to resume shooting and get some of these on an arrow to see if I dare chase hogs with'em. The real thin one is the result of a lucky flake break...Paulc
-
I was wondering about you the other day. Glad to see you are getting some time back. Looking good Paul.
-
I'll be in your neighborhood in a couple weeks for a long weekend with the wife. Maybe you and I can get together one morning while she sleeps in and break some rock? Meet Mullet somewhere? P