Primitive Archer

Main Discussion Area => Bows => Topic started by: Hans H on May 16, 2016, 04:34:11 pm

Title: simple ash
Post by: Hans H on May 16, 2016, 04:34:11 pm

Hello together,
to feel the diffrence from different designs I build this Ash,  with only a bit flipped tips.
Measurements: length: 66“, width 39 mm, thickness 12mm.
Draw- weight: 35“ @ 26“
Nothing spezial, the stick had a big riser near the handle and it was a bit small, so I glued up a pice osage for the handle. it also need some corrections for stringalignement
enjoy
(http://i1061.photobucket.com/albums/t462/hansheu/ash/staight_zpsg1dirq1r.jpg)
(http://i1061.photobucket.com/albums/t462/hansheu/ash/unbraced_zpslkrjipq5.jpg)
(http://i1061.photobucket.com/albums/t462/hansheu/ash/stringalignement_zpsxraodae5.jpg)
(http://i1061.photobucket.com/albums/t462/hansheu/ash/braced_2_zpsh8uohirj.jpg)
(http://i1061.photobucket.com/albums/t462/hansheu/ash/upper%20tip_zps0enu5sdj.jpg)
(http://i1061.photobucket.com/albums/t462/hansheu/ash/upper%20tip_2_zpsdzmndweg.jpg)
(http://i1061.photobucket.com/albums/t462/hansheu/ash/belly%20side%20lower%20tip_zpskvdfkkli.jpg)
(http://i1061.photobucket.com/albums/t462/hansheu/ash/fd_zpsryfrlymw.jpg)
(http://i1061.photobucket.com/albums/t462/hansheu/ash/handle_zpsc84fnequ.jpg)

Title: Re: simple ash
Post by: Aaron H on May 16, 2016, 06:20:06 pm

Great looking bow Hans

Title: Re: simple ash
Post by: wizardgoat on May 16, 2016, 07:19:37 pm

Nice bow, tiller looks great

Title: Re: simple ash
Post by: Redhand on May 16, 2016, 09:18:35 pm

Nice bow.

Title: Re: simple ash
Post by: GB on May 17, 2016, 03:36:48 am

Looks great!  I like simple. :)

Title: Re: simple ash
Post by: Hans H on May 17, 2016, 03:55:07 am

DC: I have to like "simple", cause I con not better
thank you all
Hans

Title: Re: simple ash
Post by: Stixnstones on May 17, 2016, 01:44:48 pm

real nice lookin bow, tiller looks spot on.

Title: Re: simple ash
Post by: simson on May 17, 2016, 03:11:33 pm

As said on the BL, this one is also good work  8)

Title: Re: simple ash
Post by: Hans H on May 18, 2016, 01:33:31 pm

thank you all, I`ll appreciate it
Simon, seems I`ve learnd a bit from my master  ;D ;D
Hans