Primitive Archer
Main Discussion Area => Bows => Topic started by: Stick Bender on December 21, 2015, 05:55:33 pm
-
Hi guys I know I have been bombing the board with newbie questions latly but winter time is the only time I have to work on my own projects ,I appreciate all the help , I'm still chasing this stave to one ring hopefully be there this week end & there's a mild sweeping side bend enough where it needs to straiting , and I have read to only steam bend non seasoned osage, so this stave is only three weeks of the stump, so my question is at what point of seasoning is seasoned to much to use steam ? I would like to hold off at least another 3 months so I can finish up 2 other bows I have going.
-
You can use steam any time to bend osage.
-
Ok thanks I was just curious which way to go , I know in Dean Torges book he spoke to not steaming seasoned wood ,yet others seem to say its fine , it seems to be one of those things in bow building where it an go ether way.
-
I don't like to steam Osage over 2 years old, at least not the whole stave. Just bending tips or re curving is fine. If you seal it good I guess you could do it anytime but after 2 years I use dry heat. If you steam seasoned/dry wood it will tend to check the same if you use dry heat on green/wet wood. IMO and we all know how that is. ;) :)
Pappy
-
I'm with Clint, I use steam on nearly all my bends, no matter their age. I just always be sure I give them 2 good coats of shellac before I steam to prevent checks and staining.
-
Unless I have a major spot bend. Like statics or deflexed handles, I always use dry heat on dry wood. I'd suggest letting it dry as is. It is much easier to shape an entire stave at once on a caul with dry heat. Generally speaking steam covers an area about 10-12" round. That's no way to straighten and reflex an entire stave. Not to mention it will move as it dries and you will have to manipulate it again down the road. My vote is to let them sit in the corner and dry.
-
as suggested, coating with shellac will help prevent checking on dry wood,,,I have used glue before as well,,I have checked wood as well :) :)