Primitive Archer
Main Discussion Area => Arrows => Topic started by: riverrat on December 10, 2015, 09:52:06 pm
-
recently ive been building some bows, out of elm, hickory, and osage sapwood. just so happens i hate wasting any wood. i have a piece of osage sapwood and a piece of elm i recently split off of logs as i made staves for the bows i made. anyhow figure a couple pieces are worth the effort to whittle down to those old fashioned baseball bat looking blunt arrows of the eastern woodlands. anyhow. im heat bending and whittling down 2. one of elm one of sapwood osage. sure beats putting em in the wood stove. ;) got a couple local squirrels love my newly sprouted green beans in the spring. maybe i can put a end to that.and make a nice pot of soup.in the mean time more to come. Tony update: this is a osage sapwood hand plained bird blunt arrow.the head has 6 facets to it {flat areas} will be working on the elm one soon. going to fletch these in the woodland 2 feather fletch style eventually.
-
Both of those should work good, Tony. Looking forward to seeing the finished arrows.
-
posted some pics.6 faceted osage sapwood bunt.still need to fletch it but i wanted to post it as it is without fletches first.its a heavy arrow! if i hit a bird or a squirrel....its soup! Tony
-
Nice work on your heads there but I'd be more worried about the spine in the shaft too.Made some out of osage before and the weight was there but with osage being so elastic the spine was too too low for my bows.That elm should be really good.Heck if they shoot well enough you don't need feathers but it can get a little harder finding them....lol.
It'll knock the snot out of those squirrels.....lol.I've put 20 gauge shotgun shells on the front end to preserve the heads a bit.....lol.
-
Nice arrows... Should teach them rats a lesson once >:D
Thanks Leroy
-
it seems to spine out for a 45 pound bow there or abouts. my spine tester is pretty primitive lol . i dont have a way to measure grains.i just know its much heavier than my hunting arrows with points. the balance is much more forward as well so im thinking when i shoot it ill have to aim about the same as i would for a 20 yard shot but up close.ill practice with it some .Tony
-
Nice looking blunts Tony, I've been wanting to make some for grouse hunting. I think I'm going to start with a heavy osier shaft or hazel nut. Ed
-
Tony,
Your blunts look good sir, but wanted to say most all that I have seen or touched did not have any fletching at all....I'm putting a pic up (hope you dont mind) of a Chippewa name of Alex Wabbanosa (sp)....anyways very nice arrow sir.
rich
-
thanks Half Eye. that does make sense. most shots i ever made with blunts i made a number of years ago were real close actually. might just leave ta fletch off this one. in a few books ive seen them both ways.Tony
-
It would sure speed up the making and you might not have to waste hunting time looking for lost arrows.
-
A few years ago, Ken75 sent me some black walnut shafts he ran through a dowel maker. One end of these shafts were still the 1/2" square stock. I made a few blunts with these by reducing the 4 corners of the square stock.
I thought I had pics but can't find tem I'll post them if I do
-
like to see them Pat.Tony
-
Nice arrow. How in the world do you manage to split out an elm shoot?? the last time I split an elm log it took an hour :o :o :o :-[
-
not a shoot, a log. i split out a log for some staves. sometimes i split a stave if its too wide. what i end up with, if its decently straight, is a nice piece of wood to follow grain on and make a arrow shaft from. not to say you cant use a shoot. it would just have to be fat to start with then trimmed down all the while following the grain although its round.planning on making a round limbed bow soon with this same process in mind :) Tony
-
Here you go, Tony. I finally found it...
(http://i5.photobucket.com/albums/y199/PatBNC/PAtradearrow2013004_zps9b724755.jpg) (http://s5.photobucket.com/user/PatBNC/media/PAtradearrow2013004_zps9b724755.jpg.html)
(http://i5.photobucket.com/albums/y199/PatBNC/PAtradearrow2013002_zpsf682f209.jpg) (http://s5.photobucket.com/user/PatBNC/media/PAtradearrow2013002_zpsf682f209.jpg.html)
Damn Photobucket!!! >:(
-
Nice.Have yet to try walnut for arrow shafts.Heard very good things about them.OH I'm not Tony...sorry.
-
nice arrows Pat. i like shoot shaft arrows because they are easy enough to find and make. but theres a lot to be said for split out arrows.whenever i have a piece of wood that can be used. it gets used lol. Tony