Primitive Archer
Main Discussion Area => Flintknapping => ABO => Topic started by: Outbackbob48 on November 26, 2015, 06:56:03 pm
-
John, here is a picture of the blade I was thinning last nite, I have noticed when thinning with copper if I get behind by this I mean pc is getting narrow faster than thin I can get aggressive and take deeper flakes and catch up and get thin, On this pc I knew I was getting behind an just could not catch up using antler, maybe with the antler I need to get aware quicker or deep thinning flakes. Not sure if this makes sense to you about being behind :o It is just a kinda feeling that i have for the end results, Anyways had fun trying to get this one thin and used just antler with just alittle touch up with the tine for presssure. Hope ya had a nice Thanksgiving Day. Bob
Just thru the tape on it and not quite as thick as I thought ;D 4 to 1 will work for now. Oh just had to try and fix a little spot on last pass Yep nice step on a pretty clean pc :(
-
Bob can you photo your antler with a ruler next to it.
-
John, it's about 9" long, was just watching some video's and I would say one of my problems is abraiding to strong and using grinding wheels. :o Somebody said brush an the light came on. Pic is up on first post :o
-
cool blade 8)
i like the veining on the piece too.
Somebody said brush an the light came on.
what do you mean?
i lightly abrade with my smooth quartz hammer stone. not sure if it does exactly what it's supposed to do, but it knocks the sharp edges down so my platforms don't fail as easily.
-
leon, I am a copper knapper and i was grinding the crap out of my platforms with a coarse carburudum abraider, platforms way to strong, :( somebody suggested to just brush :o :o ;D Bob
-
Very nice Bob! That veining is striking. Josh
-
Very nice Bob! That veining is striking. Josh
I have to agree Josh the veining of this stone is really cool.