Primitive Archer
Main Discussion Area => Bows => Topic started by: Aries on October 28, 2015, 10:29:33 am
-
I am used to working with osage so I usually don't stress much about mc after the bow is properly cured, what I am worried about are the 3 hickory long flat bows I am working on with some Newby bowyers in training. I have had the hickory staves split and driving for 6-8 months and over the last month they have had the bark off, they have now been in my hot box at 90 degrees after being worked down to rough dimensions.
I have a prong style moisture content reader but I have had a hard time getting measurements with it. Any other tips on determining moisture content?
Any tips for finishing and storing these bows to help keep them in good shooting condition.
I appreciate the help guys
-
You live in a relatively dry area(maybe not lately) and hickory loves dry! 5% to 6% is ideal. When the weather is wet, don't stress the bow or stave. You can work it down to floor tiller now and if storing in a hot box you shouldn't have to worry about the M/C at all. When you finish working on it put it back in the hot box until next session. Once winter gets here the M/C generally drops so no worries there.
-
Get a kitchen scale and measure the weight. When it doesn't drop weight for at least a week it should be good.
-
I'd bet dollars to donuts those staves are ready to rock. A 90 degree hot box is the ticket. Hickory loses it almost as quickly as it gains it, in the raw.
-
Aries, in addition to using my hot box, I also use a hygrometer to monitor the humidity in the hot box. You can get a hygrometer/thermometer from Lowes or Home Depot for about $10.00. Also download a Wood Equilibrium Moisture Content Table and tape it to your hotbox. The chart will tell you the MC of the wood at a particular temperature and humidity level. Sometimes, I have to add trays of water so the wood doesn't get too dry. A kitchen scale like wizardgoat suggested will tell you when the MC equalizes at a specific temperature and humidity level. It all works together to give you good accurate information when working with hickory.
Hope this is helpful. Works well for me.