Primitive Archer
Main Discussion Area => Bows => Topic started by: James Rodney on October 21, 2015, 05:49:48 pm
-
i think this is a sapling hickory, but the book i just bought doesn't show what the saplings look like :x
-
sorry about the half eaten away leaves, but these were all that i could get to easily.
-
Yes Hickory
-
Hickory
-
sweet.. may have 4 more staves out of this :D
-
Yes, bark can change quite a bit as a tree matures.
-
Jackpot! That's a hickory. Looks like a young pignut and a nice one! Josh
-
Great looking hickory!
-
You guys are awesome! Thanks for your help!
-
No problem, I love hickory as a bowwood, especially saplings!
-
I just hope I don't mess it up. I'll take some more pics later and and see how you guys think I should proceed
-
FAIR WARNING! That bark is stuck tight on that hickory this time of year and it's like armor plating. I would wait till spring to drop the hickory. I'd put up some dogwood and elm if you got it for now. The bark comes off of them nice with a draw knife even though its stuck tight this time of year. Josh
-
I was just cutting hickory in SC last weekend and the bark, although not full of water and easily peeled, is still able to be scraped off with a drawknife and the back of a knife without to much effort.
Might be different in other states though.
-
I was just cutting hickory in SC last weekend and the bark, although not full of water and easily peeled, is still able to be scraped off with a drawknife and the back of a knife without to much effort.
Might be different in other states though.
It would be in your best interest to be sure about that. If he drops that hickory and the bark is stuck as tight as it is most everywhere else........well.....we all know Mr. Rodney isn't exactly bashful about speaking his mind when he's provoked! :o ;) >:D. Josh
-
Come on guys, I said I was sorry for the previous remarks. If I need to wait, I'll wait.. But there are 20+ saplings around this one.
Forgive and forget.
-
You know if you're going to be like that, I won't post another thing on here. I can do this with or without help. Gun, sorry you feel the need to keep things going.
-
If you're quick getting the bark off with a drawknife and scraper it's fine. I cut most of my whitewoods around this time, just seal the back and split it.
-
I'm pretty sure Gun is pulling your leg, but since it's a subject which creates arguments and an uninviting environment to Mr. Rodney, I suggest that it not be spoken of for a while until it has aged enough to be poked fun at a little without making James feel like he's not welcome here.
Cheers everybody :)
-
That comment was made out of humor, although obviously poor humor. No malicious intent or offense meant whatsoever. My bad. Josh
-
You know if you're going to be like that, I won't post another thing on here. I can do this with or without help. Gun, sorry you feel the need to keep things going.
He was just playing with ya, don't take it too serious 8)
-
yes you can cut a sapling now,, you can even take it down to a growth ring it you like , rough it out to the shape of a bow, coat the back and handle and fades,, let it stay outside in shed or something for a week or two( slow dry),, then bring inside for final dry,, hickory is pretty forgiving, and will make a fine bow if you get the moisture content down,, heat box might be good as you work on the final tiller before putting a finish on,,, this is a fine point, but if you cut the sapling and rough it out,, clamp it into several inches of reflex,,, it will keep it from twisting and give you a little better performance,, on the finished bow,, :)
-
Come on JR. We love ya here. Relax and have fun. No ill will from these folks that I have seen. Can't beat a quick and heart felt apology like that from Gun.
-
it's all good, just been a little busy with my Pregnant woman. hormones are are running high! It's all good Gun, i'm sorry for being a little sensitive poo boy. lol . ( I have a valid excuse for the next 6 months).
So, what i've done is this. i saved all the good saplings, and chopped down one that was decent. now, i'm not really sure what i'm doing wrong, but every time i split a tree, i always end up with a very thin end, and a thick end. i should let the wood split naturally yes?
-
So, what i've done is this. i saved all the good saplings, and chopped down one that was decent. now, i'm not really sure what i'm doing wrong, but every time i split a tree, i always end up with a very thin end, and a thick end. i should let the wood split naturally yes?
If it's good straight wood and you can tell there isn't any twist, I saw a small kerf with a circular saw then split it with wedges. If not, just make sure you're splitting from the small end.
-
As stated, if the grain is straight, a circular saw cut down the center aids splitting emensly. I use this on most of my saplings and have never had a problem.
-
Using a thinner wedge also helps. We al know you're not supposed to hammer on the back of hatchets but you can take a cheap one and drive it in the side on the line you want your end split to follow.
-
Well, after several hours of splitting and scraping off bark, which was pretty easy to get off once you realize how far down to go, just pulled off in long strips. Unfortunately, this sapling was riddled with knots much like all the dogwoods I've sacrificed. All the trees I had to chop down, I chose one that ended in disappointment.
-
Did it have very many leaf scars on it, yet a straight profile, every leaf scar is most likely a knot, even if it is not raised.
-
It was kinda rotted in the middle.. By the time I removed the bad parts from belly, it was practically junk. 1/2 inch or less.
-
I see, I cut a mulberry simalar to that a while back, I feel your pain. The thing was pipe straight, it was the cleanest mulberry I think I've seen. I cut it down and found out that It had a rotted middle and that barely .75 in was salvageable on the bottom and in the middle around 1in fading to 1.5 at the top. I scooped out all the bad stuff and washed it with a bleach and vinegar mix to kill all the fungi and I think I might be able to get a 59in bendy handle bow from it. It Sucks to think you just cut primo wood and find out it wasn't so primo.