Primitive Archer

Main Discussion Area => Bows => Topic started by: Ryan C on August 10, 2015, 11:00:28 am

Title: Can I resteam an area
Post by: Ryan C on August 10, 2015, 11:00:28 am

Hello everyone, so a yew bow I'm working on was not aligned at the tips and handle so I steam bent it at the handle and it looks like I bent it a little too far. Can I resteam the area and bend it back a little?

Title: Re: Can I resteam an area
Post by: PEARL DRUMS on August 10, 2015, 11:01:28 am

Sure can.

Title: Re: Can I resteam an area
Post by: Del the cat on August 10, 2015, 11:35:35 am

If it's over bent, you may just need to warm it a little and it may well creep back.
Del

Title: Re: Can I resteam an area
Post by: Ryan C on August 10, 2015, 01:02:08 pm

Ok thanks guys