Primitive Archer
Main Discussion Area => Bows => Topic started by: toomanyknots on September 04, 2013, 10:17:03 pm
-
...So I am thinking I am just gonna masking tape off the nocks, and throw a coat on or two and see how it goes. The only thing I am worried about is the finish building up near the tape? Or sealing over the tape, and than pulling some of the finish off with the tape later? Arg...
-
Very little TruOil will soak into the horn, most of it will just wipe off. What does stick will just close up very small pores and voids. Shouldn't be a problem at all.
-
Very little TruOil will soak into the horn, most of it will just wipe off. What does stick will just close up very small pores and voids. Shouldn't be a problem at all.
Okee dokey, :). Guess Ill go tapeless than, cool.
-
You could buff the horn after each coat with very fine steel wool. You will remove anything that doesn't soak in.