Primitive Archer
Main Discussion Area => Arrows => Topic started by: smoky#1 on August 20, 2013, 02:14:51 am
-
if there are any special regulations for arrows in your state, please post them here.
-
If its a hunting head in my state, Illinois, stone or steel minimum width is 7/8"
-
Arkansas requires a minimum width of 7/8" any material no other restrictions. Oh and no poison so don't poison my arrow. ;D
Grady
-
Nebraska: •
Arrows or spears must have a sharpened hunting
head with a blade of at least 7/16-inch cutting radius
from the center of the arrow shaft. Arrows or spears
containing poison, stupefying chemical or having an
explosive tip are illegal
-
Minimum is 3/4" in WV..........Art B
-
Hunting head in WA is 7/8" wide.
-
In N.J. minimum of 1" cutting diameter. Steel only!!! :(
G
-
PA 7/8" cutting edge.
-
Metal edged, flint or obsidian with no minimum width or length in Indiana.
Tracy
-
7/8's here in Florida, but I've never had anyone with a tape measure wanting to use it when you dragged something in dead.
-
3/4" in ohio. No poison or explosives.
-
7/8th of an inch in California
-
NC, steel or stone, 7/8" wide. No barbs, unless they are shallow notches that can be filled up with sinew. ::)