Primitive Archer
Main Discussion Area => Flintknapping => Topic started by: GooseGossett on April 06, 2013, 05:39:04 pm
-
I have been trying Ralph Conrad's method of making a final pass with antler and making my points super sharp. Although my thickness can still be thinner these are some of the sharpest points I've been making. I used the same process on my PITH that I sent to Hunts with Stone. Both are out of Hill Kountry, TX chert. Not 100% sure exactly what it is and I'll bow to the guys who know their rock. I just know it's knappable :laugh:
(http://i803.photobucket.com/albums/yy316/goosegossett14/DCD82A71-23A3-4D3E-BE29-442EF3DB7CA1-2864-0000049A6894D96E_zps082dcd06.jpg)
(http://i803.photobucket.com/albums/yy316/goosegossett14/A33C22A8-339B-4388-BEF7-73A00CB93F54-2864-0000049A66A96DED_zps9db66dea.jpg)
(http://i803.photobucket.com/albums/yy316/goosegossett14/5610E33B-711B-4050-895C-17B75585C4CA-2864-0000049A6485A360_zps789365cd.jpg)
(http://i803.photobucket.com/albums/yy316/goosegossett14/82E3BC1E-5993-4C5B-8537-0D51C5D627A2-2864-0000049A6C60FA15_zps8e6ceae0.jpg)
-
Nice points really like the last one the way the white spot is on it.
Rob
-
Good looking points! Not sure about the material, as long as it works for you call it what you want ;D
Tracy
-
Lookin good Goose. Did you change over to all ABO? dpg
-
Nice points, Goose! Those are looking sharp indeed!
Scott
-
Bowtarist: I'm still too cheap to buy any antler billets. Funds are getting tight as of late with a child due in June and looking for a job but I did have a neighbor give me all his old whitetail antlers that I've been using to pressure flake a bit. So far I'm doing all copper until the final passes that I use antler. Just pushing in and twisting. Not looking to push flakes off. For me it makes them super sharp compared to what I was making and if anyone has any other tips for sharp points I'm all ears.
-
Hey goose nice work on those. How are u setting up for the twist or are u just hitting the high spots or Deltas? ~~~~~ this set up would be a clock wise twist rolling into the valleys right.
-
Nice points Goose. Didn't get a chance to chip much last time I seen you. Mike
-
Mike: You're the one my wife has to thank me for my affliction and large rock collection in the garage. :laugh:
Hunts with stone: I'm just VERY lightly abrade (I'm not sure if Ralph does) and I push in and twist clockwise on the small platforms into the valleys. It doesn't push more than 1/8"-1/4" flakes off but makes the edge thin and sharp. Then again I could be doing it all wrong.
-
Thaks goose. I'll get A hold of Ralph see what he says and let you know.
-
Edwards chert. Looks like the kind of stuff that can be found between San Antonio and Junction.
Cool points! 8)