Primitive Archer
Main Discussion Area => Primitive Skills => Topic started by: jonathan creason on February 26, 2013, 03:24:58 pm
-
Hey guys, how's it been going? Here's a knife I just finished up, thought I'd throw it up here and see if it could garner any criticisms.
This one is 1084 steel, edge quenched, with walnut scales. It is 9.25" OAL, with a 4.5" blade. The sheath is deer rawhide over veggie tan leather, with some snake skin and buckskin accents. I had some problems with the pin holes, resulting in some halos. I tried to file under them, but couldn't without making the handle thinner than I wanted.
(https://lh5.googleusercontent.com/-qgedQS2C4r0/USfB55tGzNI/AAAAAAAAAHg/D429sZYIUQs/w538-h546-p-o-k/hunter1.bmp)
-
That looks darn nice to me! I've only made one knife so far, and I used epoxy to hold the scales to the blade. How do the pins work? Do you peen them to keep everything tight?
-
That's one killer looking knife and sheath.
-
Very nice. Drop point is my favorite blade. Got a 3" been carrying since '95
Thanks Leroy
-
nice blade,
the sheath too.. looks like an antique , nice work!
-
great job!
nothing wrong with that at all.
-
Much appreciated, guys!
Adam, I'd recommend epoxy and pins or rivets of some sort. It's another layer of protection to keep everything together. I peen them slightly, but be careful. It's easy to split the scales due to the expanding pins.
-
Beautiful knife.Very nice job as usual. :)
Pappy
-
Good looking knife and sheath.
-
Nothin but positive feedback here! that is a sweet knife. very cool
-
Thank you all.
-
Mighty nice! Well done.
-
That's just perfect, shape and execution are world class right there. I got me one of your drop points and if that one is just half the knife then it IS perfect. You make a damned fine blade Joathan.
rich
-
that is a good looking knife. I was talking to my wife last night about learning how to make knifes. I work at a machine shop so i have access to all kinds of stainless some heat treated and others not or some were in between. What rockwell number is good for knifes. Also what tools are needed i know i could slap a slab in my 5 axis cnc and knock one out with just alittle clean up but I would rather do it buy hand...
-
Dam fine job!! You made an awesome blade there!!
-
I think we need more pictures to form an accurate opinion ;)
-
Hi all
Been lurking and reading up to now, but I have to say that is a seriously nice piece.
Well-cut plunge, which is complemented by the front edge of the scales, and I'm a sucker for a neatly executed full-flat grind :D
Nice tidy hamon too ;)
Couldn't work out from your later comment: do you epoxy as well as pin?
-
Thanks again, all. I really appreciate it.
Yep, I did epoxy in addition to the pins. Plus I drilled several lightening holes in the tang to help it balance better, plus give extra bonding strength.
-
I missed this one. Awesome knife!
-
We must be getting old, Crackjafty, I missed this one too.
That's one highly useful looking knife. I see knives in gun shops, hunting catalogs, and knife catalogs and all they seem to be good for is suckering idiots into buying them. They are all the stupidest, most unweildy designs/executions that they don't even make good letter openers! But this knife would be at home in the field and in the kitchen. I wouldn't hesitate to whip this sucker out in a fine steakhouse!
-
that is a good looking knife. I was talking to my wife last night about learning how to make knifes. I work at a machine shop so i have access to all kinds of stainless some heat treated and others not or some were in between. What rockwell number is good for knifes. Also what tools are needed i know i could slap a slab in my 5 axis cnc and knock one out with just alittle clean up but I would rather do it buy hand...
Go for something between 55-65 once hardened, that will give a good edge. I once made a sword-katana thing from some type of steel I could not identify. my friend has a penetration rockwell tester cause his dad works in a machine shop, and he measured the tip(which was hardened) and it was like 70 something. I use the thing for woodcutting, its a 20 inch blade, I hone it once a week, use it daily for splitting and chopping and general brush clearing. It can easily take out a 1 inch sapling of hard-wood in 2 swings. it is razor sharp, I have shaved with it once just for bragging rights. It also does not dull with ground contact. Heres the problem- I made the mistake of leaving it on a concrete block during an airsoft war, and as that little area is a popular shortcut, somebody took it and its rawhide sheath.
-
I missed the bus to the senior center, too, JW. That is one, fine looking knife, Jonathan. You're getting real good.