Primitive Archer

Main Discussion Area => Bows => Topic started by: TacticalFate on February 26, 2013, 01:38:39 am

Title: Mora Erik Frost drawknife?
Post by: TacticalFate on February 26, 2013, 01:38:39 am

I'm in the market for a drawknife for chasing rings, as I've just collected my first batch of black locust. I was wondering if anybody has or has used the Mora Erik Frost 220 woodsplitting knife as a drawknife. It seems quite a bit more multi-purpose than a traditional drawknife, since the straight handles mean you can use it as a scraper, too. Or, should I just get a traditional drawknife off ebay?

Title: Re: Mora Erik Frost drawknife?
Post by: Carson (CMB) on February 26, 2013, 03:50:10 am

I have that drawknife and I can't recommend if it is going to be your only drawknife.  I find the straight handles don't allow you any leverage, and so the blade wants to catch and spin rather than pull through the wood. The flexible blade works well for cleaning up the back around knots and such, but it is not much for taking off lots of wood in a hurry.  That is just my opinion.

Title: Re: Mora Erik Frost drawknife?
Post by: gianluca100 on February 26, 2013, 03:54:07 am

you mean this one?

http://www.a mazon.com/Mora-Frost-220-Woodsplitting-Knife/dp/B004GAZFIW

I bought it years ago and didn't use it much because I came to prefer this form:

http://de.ac ademic.ru/dic.nsf/dewiki/1552926

With that one you can cut into the earlywood and lift the growth ring above it with the leverage of the angled handles.
Plus the mora is flexibel and the other one rigid, a plus imo.

But you have to test and decide what you prefer...

Ciao,
gian-luuca

Title: Re: Mora Erik Frost drawknife?
Post by: Jodocus on February 26, 2013, 04:50:19 am

To cut down BL rings I would recommend you something heavier, like the one gianluca suggested. I think it is quite a forceful job, and the "lifting" motion helps a lot (but take care not to dent in the back  :o )

Title: Re: Mora Erik Frost drawknife?
Post by: TacticalFate on February 26, 2013, 09:26:16 am

Thanks guys, guess I'll go with a standard drawknife

Title: Re: Mora Erik Frost drawknife?
Post by: kinslayer1965 on February 26, 2013, 04:35:35 pm

TF

I was having trouble finding a drawknife that I liked that was not too expensive and I found a nice one on ebay ended up getting it for $24.00 with shipping. It is an older one but looks to be in great shape and appears to be very sturdy which appealed to me.

Clifford

Title: Re: Mora Erik Frost drawknife?
Post by: youngbowyer on February 26, 2013, 08:14:55 pm

I have that drawknife and use it almost exclusively for chasing rings. I just knocked of the handles and put on new handle that are perpendicular to the blade.

Title: Re: Mora Erik Frost drawknife?
Post by: dbb on February 26, 2013, 08:40:14 pm

I have one of those Moraknives as well,the thin blade is prone to take more than intended when you use more than a little force.
For light work they are very good and as a scraper on a flat belly it is perfect.