Primitive Archer

Information and Resources => Trading Post => Topic started by: rileyconcrete on January 10, 2013, 01:55:52 pm

Title: Need 4 inch round aluminum
Post by: rileyconcrete on January 10, 2013, 01:55:52 pm

I am in need of a solid 4 inch by 6 inch long piece of aluminum. If you have anything like this let me know as I can machine what I need out of it. Can be slightly smaller also. 

I have sinew to trade, plenty of obsidian also.

Thanks tell

Title: Re: Need 4 inch round aluminum
Post by: RBLusthaus on January 10, 2013, 03:13:55 pm

I have about 30 bars (?) of alum that are each about 14 inches long and about 3 inches wide and about 1/4 inch thick.  I will measure tonite and give more exact measurements.  They are all stamped "Alcoa" with other markings as well.  Will take and post pics if interested. 

Russ

Title: Re: Need 4 inch round aluminum
Post by: rileyconcrete on January 10, 2013, 03:39:47 pm

Guess I should have put solid round stock.  Thanks for the reply RB.
Tell

Title: Re: Need 4 inch round aluminum
Post by: RBLusthaus on January 10, 2013, 05:32:22 pm

ahh, round - no, I don't have that, sorry.  I see now your header says round too. 

Good Luck.

Russ 

Title: Re: Need 4 inch round aluminum
Post by: rileyconcrete on January 10, 2013, 07:49:50 pm

Thanks Russ.

Sonny I was hoping to trade to keep costs down.

Tell

Title: Re: Need 4 inch round aluminum
Post by: aaron on January 10, 2013, 11:03:24 pm

tell, are you going to glass buttes this year?
aaron

Title: Re: Need 4 inch round aluminum
Post by: seider on January 11, 2013, 11:51:21 pm

What do you have to trade I bet I can come
Up with something for you. I am a
Machinist and we do a lot of parts for lokehead Martin.