Primitive Archer

Main Discussion Area => Flintknapping => Topic started by: Catfish42 on November 10, 2012, 01:08:57 am

Title: Making first batch of primitive arrows need some advice
Post by: Catfish42 on November 10, 2012, 01:08:57 am

One problem need to know do I crest arrow first or lacquer arrow first. Bought shafts bare but never done anything like this, help

Title: Re: Making first batch of primitive arrows need some advice
Post by: TRACY on November 11, 2012, 07:55:24 am

Hey catfish, check in the arrow section above this one and I'm sure you will find some helpful info. I always stain/sealed and then crest later with a final coat over that. I don't crest much, I just need good shooting ammo :D


Tracy