Primitive Archer
Main Discussion Area => Arrows => Topic started by: anasazi on September 15, 2012, 03:53:30 am
-
Would my arrow length change with a bow with a shorter draw length? My normal draw length is 28 in but i am building a short bow where i figure the draw length will be closer to 16 in and about 60# +/- how would a shorter arrow affect accuracy?
-
Your longer arrows may shoot just fine from a shorter bow. I think longer arrows clear the bow easier anyway. You will just have to try and see what happens.
I draw 26" but build my arrows to 29" or 30" and I shoot these arrows from a 68" bows or my 53" sinew backed osage.
-
Just like longer bows are more forgiving to shoot, I feel longer arrows are more forgiving, too.
I used to shorten my arrows as much as possible, fiddling with tuning them over and over. Then I ended up with a dozen shafts that were too heavy for me to shorten them....and suddenly was shooting much better groups. Maybe they are mnot more forgiving, maybe I am subconsciously using the extra length as my mind is aiming the shot. Or maybe they are so long they are already closer to the target while still on the bow.
Who cares, I like the results.
Your mileage may vary, offer void in Massachussets, tax/title/license not included, brush after every meal, always serve chilled.
-
I might have to play around with it some. Right now i am trying out shoots and i just found some reed grass close buy so i need to try that also. And finish my two bows. Hey does any one have some free time they want to give up i seem to be running a little short on that.
-
I would start by shooting with arrows as long as possible, observe their flight and adjust their lengh accordingly. Arrows which are too stiff normally fly to the left of target (for a right handed shooter) and to the right if not stiff enough (for a right handed shooter). Like others have stated I seem to prefer longer arrows. I draw 26.5" and use arrows 30" long, on average.
-
I use to cut to draw length too, but the first time I broke a point was the last time I shot that one @ full draw. Longer arrows mean more shots. ;) break the tip, retapper or whatever, add a new point and get it back in a target....hopefully. dp
-
Yeah, pretty much same as everyone said. I was told by a traditional archery teacher to add 2" on to your draw length for your arrow. That way you could probably break the tip 2ce before your arrow is too short to use.
-
A 2 inch longer arrow really should be 10# more!
Having said that I have enjoyed shooting very long arrows at 48 inches or more. Basically reproduction Amazonian arrows. If they are stiff enough they then seem to go quite well from a variety of bows and though slow are somehow quite predictable to shoot.
I'v just made myself some short arrows at just about my draw length (after a gap of 6 years or so) to see whether I shoot long or short better. My feeling is that I'll always find the longer arrows somehow more fun and satisfying to shoot.
Mark in England
-
My suggestion would be to cut them to normal length for the bows that you normally shoot.
When using them to shoot out of your short draw bow, wrap sinew or whatever you have available around the arrow at the draw length required so as to give you a little bump or indication of that bows limit. I have no experience with short draw bows so this is only a suggestion.
-
A 2 inch longer arrow really should be 10# more!
Mark in England
To Mark,
"A 2 inch longer arrow really should be 10# more!"
10# more what? By adding inches you lower the spine weight. ??
dpg
-
You actually do add spine by cutting them short and lower spine by leaving them longer. That is why I suggested leaving them the same length as you would normally use (if shooting the same poundage of bow no matter what the draw length of that particular bow).
-
Shaft spine is a good starting point, but that is all. Not all bows of a given draw weight respond the same to a given spine arrow.
There are various things that can affect the best spine: Bow length, type of bow, bow construction, bowstring, brace height, type and weight of pile, how the arrow is released and whether the shaft is tapered or straight. There may be others that my currently foggy mind is forgetting.
Bill