Primitive Archer
Main Discussion Area => Bows => Topic started by: smoke on April 13, 2012, 11:06:31 am
-
My curiosity was recently sparked by some comments on this site regarding the "Torges" approach to limb length and tillering. Inspired by the conversation, I bought and read Dean's book - but I remain unconvinced that equal length limbs are inadequate. So for those of you who have shot bows with limbs of equal length and bows with a longer top limb, put your theory aside, and tell us which you think actually shoots better. I realize this question seeks a subjective response but your personal experiences have been very valuable to me in the past and I'd like to hear them once again . . . before I tackle my next stave. Thanks much!
-
All of mine are equal limb unless I have a problem and need to pike the lower,Don't know much about Dean's style bow,but never had an issue with mine. :) :) He say that is the only way to make a bow that will shoot good,I can assure you that ant true. :) I think it is just a matter of preference. :) :)
Pappy
-
I've made and shot both and can't tell a difference in performance, as long as the tiller is fitting to the symmetry (or asymmetry as the case may be). I agree with Pappy, it's a personal thing. Some people may perhaps shoot better with one or the other because of nuances of shooting style, but I think neither is inherently better than the other. I've read some of Dean's stuff and some of it is awesome, but he does seem to overcomplicate things at times. That said, I do have great respect for his ability as a bowyer and by no means consider myself an equal, but even a student may question his teacher ;)
-
I've also just read and re-read his book and found myself nodding in agreement on almost every page. Personally I feel bows with shorter lower limbs are better balanced in the hand however the way this translates to how the bow actually ahoots in terms of accuracy is subjective at best. I am most accurate with elb's with shorter lower limbs maybe there is less going on during and just after release. On the flip side i've just won a field comp here in the UK with ashort osage recurve with equal length limbs....
As with most of these debates I guess it comes down to what suits you best and what is 'right' for one may well be 'wrong' for someone else.
-
Trust me
Its all in the tillering !!
Guy
-
All of my bows for the last 10 years or so have had equal limbs. Symmetrical limbs are easier for me to see tiller and my bows all ballance very well in my hand.
-
Having built both, I strongly prefer a longer upper limb. It's not that I'm so great a shot as to notice a marked decrease in arrow porposing, so much as I've noticed a marked change in set after a few thousand arrows. Longer upper limbs carry nicer, too.
-
I have always just done equal length, but I am certainly no master archer, so not sure if I could tell a difference either way. Like Pat said, it does help me with tillering too.
-
Equal length seems to work for me.
Pete
-
I make all of mine equal length, or symetrical, which ever you prefer. They shoot very well. And like Pat said it's easier to see the true tiller. Like you said though, it's a personal prefference
rich
-
The other important thing to think about is the fact that the lower limb needs to be stiffer than the upper.
So how do you go about making it stiffer?
If your limbs are the same length then you either have to make it wider or thicker or a combination of the two. Just make it thicker and leave the width the same = more strain and therefore set. Make it wider and leave the thickness the same = heavier lower limb.
Maybe it is best to just make it shorter and naturally stiffer, with the same width/thickness ratio for equal strain.
When you make a bow with a shorter lower limb they definately balance around the bow hand pressure point better. Bows with equal limbs when held here are always lower heavy. I'm not saying this is necessarily a bad thing but it does mean you need to 'grip' harder meaning accuracy can be affected.
-
I have tried both ways, but I find equal length works best and definately easier to tiller, just make the bottom limb slightly stronger... this gives the option to reverse the bow if necesary and make the bottom the top, if the bow goes out of tiller, provided ther is no arow shelf , of course
-
I have tried both ways, but I find equal length works best and definately easier to tiller, just make the bottom limb slightly stronger... this gives the option to reverse the bow if necesary and make the bottom the top, if the bow goes out of tiller, provided ther is no arow shelf , of course
Thats insight and forethought at work!
The other important thing to think about is the fact that the lower limb needs to be stiffer than the upper.
So how do you go about making it stiffer?
If your limbs are the same length then you either have to make it wider or thicker or a combination of the two. Just make it thicker and leave the width the same = more strain and therefore set. Make it wider and leave the thickness the same = heavier lower limb.
Maybe it is best to just make it shorter and naturally stiffer, with the same width/thickness ratio for equal strain.
When you make a bow with a shorter lower limb they definately balance around the bow hand pressure point better. Bows with equal limbs when held here are always lower heavy. I'm not saying this is necessarily a bad thing but it does mean you need to 'grip' harder meaning accuracy can be affected.
Same here! Take your pic smoke.
-
Done both. Really depends on the piece of wood and what I have to work with. I also tend to make my lower limb a bit stiffer, the reason is I shoot 3 under. There is more stress on the lower limb with three under in my opinion. I prefer a slightly longer upper limb, but with a longer upper limb and a stiff lower limb, the tiller looks a bit off.