Primitive Archer
Main Discussion Area => Flintknapping => Topic started by: gstoneberg on January 20, 2012, 01:44:26 am
-
I've have messed up so many points trying to notch it's almost funny. I broke 2 tonight (one I dropped and it broke when it landed... :'() before I got a nice one to the point of notching. I had 2 nice thin notches going and then, as usual, I knocked off the corner of the point. The point was so wide I figured I'd just continue notching and the next notching flake I took removed the entire edge on that side. It's like a flute that goes the entire length of the point, only on the side, I don't know how I do this... ::)
(http://farm8.staticflickr.com/7155/6729094903_d00b1476df_z.jpg)
(http://farm8.staticflickr.com/7004/6729094483_1a853e60a5_z.jpg)
I still have enough width to get a point, but I called it a night before I broke something else. :D
George
-
I had almost the same problem today.
-
Hey G I will do a set of drawing explaining how I notch so as to prevent what you are describing.
I think we all had the same problem at one time. I will try to describe the process and the drawings will clear it up.
1 when I start I use a pencil to make where the notches are going to be.
2 I make sure that platform is ready for the first flake to be removed. I take a very small and very light flake
3. I take 2 more small flake from that same notch in the corners. Removing the inside corners prevents the opposite side flake from popping off the ears or widening the notch. Now flip and do the same on the other side but with a little more power. I said a little more. You can increase the power as you move in for two reasons. One the stone is getting thicker and two you are not at as close to the edge so the likelihood of a flake making its way back is diminished
Conclusion. Aim small miss small. Same idea small flakes prevent big problems. This will prepare the notch for a more powerful flake removal on the other side.