Primitive Archer

Main Discussion Area => Flintknapping => Topic started by: JustinNC on September 11, 2011, 06:33:26 pm

Title: First time...
Post by: JustinNC on September 11, 2011, 06:33:26 pm
we shall see how it goes tomorrow evening.

(http://i36.photobucket.com/albums/e28/treednnc/rockcooking.jpg)
Title: Re: First time...
Post by: Tower on September 11, 2011, 06:45:16 pm
That's the way I do it. Looks like your on the right track. Ease the fire up, & about 3 inches of dirt compacted. Unfortunately with the fire dangers here in TX. Any outside fire would probably put you in jail.
Title: Re: First time...
Post by: JustinNC on September 11, 2011, 06:52:34 pm
These were per Mr Parker's (the one in FL) instructions. I got about 3" of compacted sand on top. 2 bags of charcoal and a bottle of lighter fluid. If it don't work, I'll blame him ;).
Title: Re: First time...
Post by: RickB on September 11, 2011, 08:16:00 pm
Justin. I start the charcoal in the morning and take the rock out the afternoon of the third day. I find that the rock is pretty hot if you try to get it out the day after you light the fire. Bring some to the NC Knap-IN. See you there, Rick B
Title: Re: First time...
Post by: JustinNC on September 11, 2011, 08:36:42 pm
Not going to be able to make it to the knapp in unfortunately. This is some Cowboy rock along with a couple other odds and in's. Trial and error. I probably wont be able to check it tomorrow evening anyway.
Title: Re: First time...
Post by: mullet on September 11, 2011, 11:31:17 pm
 If they are blown up when you check it, go with one bag next time. That's a lot of charcoal for that small tire rim. That round metal I'm using is almost 40" across.
Title: Re: First time...
Post by: JustinNC on September 11, 2011, 11:38:47 pm
most of what i put in arent good pieces anyway...what i did like is under about 6-8" of sand in the bottom. i just wanted to see how each material reacted and at what depth...some probably didnt need heat but i heated some not so good shaped pieces to see what itd do
Title: Re: First time...
Post by: cowboy on September 12, 2011, 11:54:18 am
Looks like it aughta work. Those that you planted 6 to 8 inches down probably won't be affected. That tx stuff i bury somewhere between 2 1/2 to 3 inches compacted and keep a fire on it all day with about four inches of coals by the time it gets dark. Man it really slicks em up..
Title: Re: First time...
Post by: JustinNC on September 12, 2011, 12:17:31 pm
Looking back Paul...theyre not that deep. The whole thing is probably 9-10" tall. There was about 2-3" of sand in the bottom, and the coal is about an inch below the surface...so Id guess around 4-5" or so...we'll see....Lowes has charcoal on sale right now if it dont.
Title: Re: First time...
Post by: JustinNC on September 13, 2011, 11:41:37 pm
still had red coals on it this evening
Title: Re: First time...
Post by: soy on September 14, 2011, 04:09:23 am
Forgive my ignorance, but what are you doing  ???
Title: Re: First time...
Post by: JustinNC on September 14, 2011, 10:03:42 am
Heat treating rock
Title: Re: First time...
Post by: soy on September 15, 2011, 12:57:40 am
What do you accomplish by heating the rock?
Title: Re: First time...
Post by: JustinNC on September 15, 2011, 01:02:49 am
It's finiiisshhhed.


Had some that sploded that was up high and in the center. Only lost 2 pieces, had one or two other pieces that had a piece popped of. Haven't got to see the workability. Got one or two pieces that were down low that might go again next round just to see how it goes.
Title: Re: First time...
Post by: JustinNC on September 16, 2011, 09:55:43 pm
Wow...works great!
Title: Re: First time...
Post by: mullet on September 17, 2011, 12:41:29 am
 ;D ;D ;D ;D ;D
Title: Re: First time...
Post by: JustinNC on September 17, 2011, 01:06:02 am
;D ;D ;D ;D ;D

Yeah yeah yeah, you knew it was coming eventually. I'm convinced.