Primitive Archer

Main Discussion Area => Arrows => Topic started by: osage outlaw on July 27, 2011, 09:34:48 pm

Title: bandsaw blade point question
Post by: osage outlaw on July 27, 2011, 09:34:48 pm
How big of a bandsaw blade will make a good trade point?  The Maint. guy at work gave me the old blade from the horizontal metal cutting bandsaw.  I didn't measure it, but I would say it is at least an inch wide and fairly thick.  Also, what is the best way to cut out the points?  I don't really have any metal working tools.  Would a dremel be to small to cut them out?  Thanks.
Title: Re: bandsaw blade point question
Post by: Pappy on July 28, 2011, 08:22:05 am
I use a dremel on some of mine,it works fine. Be sure and hold the blade straight or it will wear out very very quick if you get it in a bind.The ones I use are 50/1000 thick I would say 1 inch wide by 2 long would make a pretty good Size Hunting head. :) :)
   Pappy
Title: Re: bandsaw blade point question
Post by: Pat B on July 28, 2011, 12:03:45 pm
With limited metal working tools and experience I've had my best luck using a cold chilel and small sledge hammer to score the metal than break the blades apart. After that I use a course file then fine file to shape and sharpen the blades.  I've used this method for knives also.
  When I tried a Dremel tool and fiber wheel it took 4 wheels to cut out one trade point. At that rate I am better off buying store bought points.  ::)
Title: Re: bandsaw blade point question
Post by: bowtarist on July 28, 2011, 02:59:54 pm
I must not be able to keep my dremel straight, I brake blades like crazy.  I use a cold chiesel and a small slegde or 24 oz. ball peen hammer.  If you don't have a cutting surface like an anvil, small pcs. of train rail, or even the rail plate that is spiked down between tie and rail work good and they have holes in them if you want to nail them down to a stump or the like.  I use a file and or a bench grinder to shape.  Cut em alittle big.  I like using band saw blades, you can get a lot of points out of them.  sometimes I even cut them at an angle and leave the teeth on as one edge of the blade, got that idea from my 7 yr, old  :).  I've not shot one yet, but they look grusome.  I haven't hunted large game w/ these either, I mostly make small game points.  Check you local hunting laws and if all's good, I'd believe if sharp, they'd take about anything down if hit in the vitals.  Good luck and better yet, have fun.