Primitive Archer

Main Discussion Area => Bows => Topic started by: Kountry83 on April 03, 2011, 04:11:01 pm

Title: Still working on my osage recurve and I have a question please...
Post by: Kountry83 on April 03, 2011, 04:11:01 pm

Hey ya'll

As ya'll know Im still working on my first recurve and im stuck.
The length of the bow is 56 inches ntn, what im stuck at is Im confused on where to start my reflex at and the dept of the relex...any suggestions?
The bow width starts from the grip at 1.5 inches faded to 1 inch at mid limb to the tip at .5 inch, thickness all the way down is about an .5 inch.

So if ya'll have any ideas I would appreciate it, thanks again for the support and I will post pictures soon.

Kountry

Title: Re: Still working on my osage recurve and I have a question please...
Post by: Pat B on April 03, 2011, 04:33:42 pm

Will you post pics so we can see the back profile and the side profile?

Title: Re: Still working on my osage recurve and I have a question please...
Post by: artcher1 on April 03, 2011, 04:44:27 pm

What's your draw length going to be on your bow Kounty?   

Title: Re: Still working on my osage recurve and I have a question please...
Post by: Kountry83 on April 03, 2011, 05:59:50 pm

I will take pictures and try to upload them, and the draw im looking for is 26-28 at anywhere of 60# to 70#...
thank you for ya'lls responses