Primitive Archer
Main Discussion Area => Bows => Topic started by: Kegan on May 28, 2007, 01:36:11 pm
-
Well, here it is- the short little sinew backed red oak I had brought up in "Gluing Sinew". It is 55" tip to tip, 54" ntn, with a slightly bendy handle. It draws about 47# at 26# wtih absolutley no perceivable stack. It is 2" wide to mid limb, tapering to 3/8" pin nocks. It draws very smooth and shoots like a dream! It is dead accurate and completely quiet. I attacked three layers of back sinew with Titebond II and heat treated the bell- giving it all a nice color under the boiled linseed finnish. I plan on using it this summer for crows and groundhogs, and deer, turkey, and small gsame this fall. I'll post pics of the arows i made for it on the Arrows forum.
[attachment deleted by admin]
-
Thats a sweet lookin little shooter Kegan, good job.
Dana
-
Nice little shorty, Kegan. ;) Pat
-
Good looking bow Kegan! What do you mean by Heat Treated the Bell? ??? David
-
Very nice Kegan! She sure can take a good bend.. ;) Looks like a rugged little hunting bow! Nice two fletch arrows also.. ;D
-
She looks good Kegan. Let us know how you like the TB II and sinew a little farther down the road. Justin
-
Good looking little bow.
-
The Sioux in this state (Montana,1870) would have great success hunting bison from horseback with this great killer. Really primitive which is what this site is all about. Got you bookmarked for May Self Bow of the Month.
-
i like it a lot. just out of curiosity, is it the picture or is there a slight stiff spot in the upper mid-limb?
really cool set with those arrows.
-
Might be a flat spot today, tomorrow it might be gone. Thats sinew for ya. And it really doesn't have to be perfect, sinew will hodla bow together nicely.
I like the bow, very round tiller and very primitive. My word of caution, is be careful about using a real abrupt cut-in to the handle on a bendy handle bow like that. I've had them split at the beginning of the wide part of the limb, running into the limb. If you are making a bow with fades, you don't want the bow beinding into the fades. The bend should stop at the start of the fades.
Cool bow, it'll get better with age too.
-
Cool bow,I'm with lennie on the bendy handle and fades but it seemed to work on that one.
May be the sinew.Nice job and real primitive looking. :)
Pappy
-
So for a bendy handle "D" type bow no cut-ins to narrow the handle?
This could be tough with white woods where ya might need 2" limb width.
Please explain further if ya would.
Thanks
Dana
-
Dana, Just my thoughts on the matter...With a bendy handle bow if the handle area is cut out it leaves unprotected edge grain that could splinter at full draw. One remedy would be to wrap at the top and bottom of the cut outs with sinew or thread to support this area. Pat
-
Reason I ask is I had one blow on me last night it was a glue up in Perry reflex maple backed ash and I had cut in on the handle area about 0.25"
on each side, It was still on the long string when she split on me from the cut out up to towards the tip. It was a very bendy handle.
It was a first attempt live and learn eh.
If ya kept the cut in gradual would that help? Like over a couple inches long.
Dana
-
Never seen a D style bow 2 in. wide.My rule is I don't want them to bend in the fades,I have had several split up at the wide part where you violated the longitudinal grain.So now I mesure out anywhere from 1/2 to 1 in. from the fades and make sure they don't bend up that far. :)
Pappy
-
Sorry about high jacking yer thread Kegan, I will start another.
Dana
-
Its a fine bow and as in the title a good "Summer Stalker" I think! I like the tiller. ;)
-
Thanks for the kind words everyone! I really like using the Titebond- it didn't require me to immerse the sinew in glue, but moved around the strands as they were applied. It is also very water-resistant (was shooting in some light rain the other day- no problem).
As far as the handle goes- it isn't a true D-style. The handle area doesn't bend as much as the limbs, but the thinner handle doesn't have as much wood in between the limbs- I beeleiv this creates an effect similiar to thin limbs. It was fine even before the sinew.
Got to try another one of these when I get more sinew (really helped prevent string follow) at a higher poundage. Oooh- more projects ;D!
-
Very nice looking bow Kegan.Like Oldbow said it look's primitive.On the next one,you can gain some speed by taking more wood off the tips.
-
Very nice bow, Keegan. I like the tiller. I also like that you were able to tiller in a little bending through the fades and into. Not a problem as long as it is done correctly by thickening the handle appropriately. Good job. Jawge