Primitive Archer
Main Discussion Area => Bows => Topic started by: Bear on May 25, 2009, 06:55:16 pm
-
Is there a trick to making them not get all pixelated? I have a bow I'm ready to post but the pics of my last bow looked pretty bad on once posted. I have excellent pics, but by the time I resize them to fit the board they are all blurry and pixelated. Any ideas? What are the maximum pixels allowed here?
-
The file size limit is 200kb, which is usually a pretty good, sharp pic. If you resize them to 640x480, most of them will post. If some still wont, try saving them at a bit lower quality, but you should be able to get good sharp pics within the size limit. What program are you using to resize them?
-
I'm using Hijack. 640 wide is what I have been doing. Maybe I should jsut try again.
-
Depends on if you're making them bigger or smaller. For making them smaller I use paint on my computer, and reduce to 25%. If you're trying to make them bigger, you're probably better off using PhotoBucket, and posting a link.
-
i like picassa 3 and its free from google
-
I like to use a site that is called shrinkpictures and it's free too.
D
-
i use imageshack,it too is free
-
Just use photobucket. You don't have yo re-size them and they always come out good
-
Thanks everyone. This last batch came out great, just using Hijack. Guess I must have just overlooked something before.