« previous next »
Pages: [1]

Author Topic: Ash shaft finish...?  (Read 4497 times)

0 Members and 1 Guest are viewing this topic.

Online PaulN/KS

  • Member
  • Posts: 1,388
Ash shaft finish...?
« on: October 31, 2008, 11:15:48 pm »
Just got a dozen tapered ash shafts from The Nocking Point and I'm wondering what a good finish might be? I'm thinking wipe them with some Watco oil stain then maybe some tru oil finish to seal them. Don't have a dip tube so need to keep it simple and without laquer.
Any ideas...?
Logged

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: Ash shaft finish...?
« Reply #1 on: November 01, 2008, 05:52:04 am »
Tung Oil works good..........
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline ricktrojanowski

  • Member
  • Posts: 2,064
  • Worlds Greatest Deer Repellent
Re: Ash shaft finish...?
« Reply #2 on: November 01, 2008, 06:40:50 am »
I just made some arrows from ash.  I used a water base aniline dye, then used Waterlox brand tung oil.  I use it quite a bit on arrows it is durable yet not shiny.
Logged
Traverse City, MI

Offline DanaM

  • Member
  • Posts: 9,211
Re: Ash shaft finish...?
« Reply #3 on: November 01, 2008, 08:09:48 am »
Tung oil, True Oil, Spar Varnish lard, wax, heck just about anything will work
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Ash shaft finish...?
« Reply #4 on: November 01, 2008, 10:10:40 am »
Tru-oil is cheap, easy, and effective.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Coo-wah-chobee

  • Member
  • Posts: 2,503
Re: Ash shaft finish...?
« Reply #5 on: November 01, 2008, 11:47:43 am »
Quote from: Hillbilly on November 01, 2008, 10:10:40 am
Tru-oil is cheap, easy, and effective.
                                                                                                                                                                                                                                                                                                                                                                                                                      Grease is same......................
Logged

jamie

  • Guest
Re: Ash shaft finish...?
« Reply #6 on: November 01, 2008, 01:07:14 pm »
dont use any type of heavy build up for a finish . like gasket laquer or poly. when ash needs a lot of straightening it requires heat . a heavy finish will melt. tung is great like said. ive soaked them in linseed oil but it brings the weight up a lot. fat is my choice. peace
Logged

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Ash shaft finish...?
« Reply #7 on: November 01, 2008, 03:42:57 pm »
Yep, I like bear grease, too.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.
Pages: [1]
« previous next »