Author Topic: Tiller check again  (Read 6876 times)

0 Members and 1 Guest are viewing this topic.

Offline Jesse

  • Member
  • Posts: 2,129
Re: Tiller check again
« Reply #15 on: October 24, 2008, 11:26:33 pm »
Well OK then :)   I wont mess  with it much more then.   
Thanks for the encouragement. It helps to hear advice from the pros.
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline D. Tiller

  • Member
  • Posts: 3,507
  • Go ahead! Bend that stick! Make my day!!!
    • Whidbey Island Soap Co.
Re: Tiller check again
« Reply #16 on: October 24, 2008, 11:44:37 pm »
Nice! Now leave here alone!!!!  ;D
“People are less likely to shoot at you if you smile at them” - Mad Jack Churchill

Offline Eric Krewson

  • Member
  • Posts: 5,432
Re: Tiller check again
« Reply #17 on: October 26, 2008, 11:19:20 am »
Looks pretty good but I seem to detect a stiff area on the outer 3rd of the right limb.

Rich Saffold

  • Guest
Re: Tiller check again
« Reply #18 on: October 26, 2008, 12:39:35 pm »
I'd shoot it and see how it feels, perhaps several times  ;D

Offline Sparrow

  • Member
  • Posts: 1,985
  • Who shot cock robin ? I said the sparrow.
    • Dream Fish Charters
Re: Tiller check again
« Reply #19 on: October 26, 2008, 10:42:37 pm »
  Looks really nice.Good job !  Frank  (P.S. I ain't no expert,but I know pretty when I see it)
Frank (The Sparrow) Pataha, Washington

Offline Jesse

  • Member
  • Posts: 2,129
Re: Tiller check again
« Reply #20 on: October 26, 2008, 11:02:19 pm »
Thanks again guys. After further review I tend to agree with Eric. Outer limb on the right isn't bending much but Its not taking set and it shoots good so I dont know. ??? I think Im gonna work it just a little more ;D     Jesse
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline Sidewinder

  • Member
  • Posts: 1,946
Re: Tiller check again
« Reply #21 on: October 27, 2008, 12:44:57 am »
Jesse, don't go getting picky on us now, that bow is looking good. I'm with the crew on this one and as the Beatles sang " Let it beeeee, let it be, let it beeeee let it be. Seeking words of wisdom let it beeeee".  lol   Danny
"You know a tree by the fruit it bears"   God

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Tiller check again
« Reply #22 on: October 27, 2008, 12:48:13 pm »
I'm with Eric,look good but if you need to loose a little weight I would work on the right limb just a bit.Very nice so far.You still have 3 inches to go,what is the weight now ? :)
   Pappy
   
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline Jesse

  • Member
  • Posts: 2,129
Re: Tiller check again
« Reply #23 on: October 27, 2008, 09:46:20 pm »
I'm with Eric,look good but if you need to loose a little weight I would work on the right limb just a bit.Very nice so far.You still have 3 inches to go,what is the weight now ? :)
   Pappy
   
Right now its just a little under 50# @ 25". I wont have time to do any more on it until  sat.  :'(
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline GregB

  • Member
  • Posts: 4,079
  • Greg Bagwell
Re: Tiller check again
« Reply #24 on: October 28, 2008, 08:28:45 am »
Jesse, I don't remember what weight you were after...you're probably around 56# or so now at 28". If that is the close to the weight you're after, I'd leave it alone at this point. Also keep in mind that you'll probaby lose a couple of pounds shooting it in... ;)

Greg
Greg

A rich person can be poor monetarily, the best things in life are free...

Offline Jesse

  • Member
  • Posts: 2,129
Re: Tiller check again
« Reply #25 on: October 28, 2008, 09:32:18 pm »
Greg I will be happy with 50# @ 28 on this one.   My draw is more like 27" and I usually like more poundage  but I have a feeling this bow might end up in someone else hands ;)    Jesse   
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Tiller check again
« Reply #26 on: October 29, 2008, 07:45:46 am »
I don't see a problem with leaving it like it is,I just thought if you still had some weight
you could touch up that limb. :) How that gal doing ? Getting big I bet. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline BearG

  • Member
  • Posts: 1,261
Re: Tiller check again
« Reply #27 on: October 29, 2008, 12:25:59 pm »
Jesse look good man
I call a lot of people brother, but only count a few as family.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Tiller check again
« Reply #28 on: October 29, 2008, 07:02:10 pm »
My advice is to stop makin' bows that look so perfect.....it ain't natural.

 ;D
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline Jesse

  • Member
  • Posts: 2,129
Re: Tiller check again
« Reply #29 on: October 29, 2008, 09:24:26 pm »
How that gal doing ? Getting big I bet. :)
  
Doing great Pappy. she is 60# already. I cant believe how big shes getting for only being 6 months. Big mama is one of her nicknames now ;D I gotta get her fixed soon or Im gonna be giving you a pup. :D Lab and shepherd mix? hmmm might be ugly :)
Thanks for the input guys. Like I said before. Having all you pros chime in sure helps me learn. Im gonna try to finish her this weekend.
 
« Last Edit: October 29, 2008, 09:27:53 pm by Jesse-S »
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark