« previous next »
Pages: [1] 2 3

Author Topic: Tiller check again  (Read 6874 times)

0 Members and 1 Guest are viewing this topic.

Offline Jesse

  • Member
  • Posts: 2,129
Tiller check again
« on: October 24, 2008, 02:50:55 pm »
I had another thread for this bow a while ago but thought I would start a new one. I had to put it down for a while and just started working it again. Its funny how a few hours work can take months  :D  Right now this Maple from Dana is pulling 45# @ 23" Im gonna tiller to 28" Looks to me like the right limb needs work mid limb and maybe just out of the fade? Picture is crooked again. oops hard to pull the rope and hold er steady at the same time. :)  Feel free to draw red marks or circles or say what your thinking ;D        Thanks in advance
 Jesse



Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Papa Matt

  • Guest
Re: Tiller check again
« Reply #1 on: October 24, 2008, 03:03:03 pm »
Brother, I'll tell ya what I'm thinking. I'm thinking your tiller is dang close to perfect and it is reflected in the fact that your unbraced profile shows no string follow. Greese it down, oil it up, put a handle on it, whatever you want to do. She's good to go.

Good idea putting it down. Sometimes that's what it takes to have an outcome as good as this. Way to go. What kind of pundage are ya lookin' at there?

Got me wantin' to try some hard maple. What is the exact name of it? Silver Maple?

~~Papa Matt
Logged

Offline Jesse

  • Member
  • Posts: 2,129
Re: Tiller check again
« Reply #2 on: October 24, 2008, 03:16:56 pm »
 :) Thanks  Papa Matt  I  see spots that need work but I dont want to come in too light either. I will try for 50# I got advice to string it backwards and heat treat the belly  when I got it to brace which I did. I also got advice to do it again when I get it bending nice at 25". But  If its still not showing follow at 25" I might just skip the second belly heat treatment.  I had the heat gun to this bow a bunch already just to straighten it. Putting it down for a while is a good thing but I started this bow at Pappys in the spring :D Actually Pappy laid it out for me.    Its hard maple by the way. I heard silver isnt much good.  Thanks for the compliment
  Jesse
« Last Edit: October 24, 2008, 03:29:52 pm by Jesse-S »
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Tiller check again
« Reply #3 on: October 24, 2008, 03:55:35 pm »
That's what I'm thinking too Jesse - I'd seal her up and start shootin.
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Tiller check again
« Reply #4 on: October 24, 2008, 05:50:57 pm »
Looks darn good. Make the limb on right the bottom 'cause it's a tad stiff. Nice job. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Jesse

  • Member
  • Posts: 2,129
Re: Tiller check again
« Reply #5 on: October 24, 2008, 05:59:53 pm »
Thanks guys. So what I'm hearing is I dont have any major issues at this point. Im gonna give it a pull to 25 and see what she looks like. Right limb is the bottom and has been from the start because the string lies a little to one side of the handle.
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline D. Tiller

  • Member
  • Posts: 3,507
  • Go ahead! Bend that stick! Make my day!!!
    • Whidbey Island Soap Co.
Re: Tiller check again
« Reply #6 on: October 24, 2008, 06:57:24 pm »
Yeah! Whatcha want???

Tiller
Logged
“People are less likely to shoot at you if you smile at them” - Mad Jack Churchill

Offline Jesse

  • Member
  • Posts: 2,129
Re: Tiller check again
« Reply #7 on: October 24, 2008, 07:03:57 pm »
Just making sure your ok David :)
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Tiller check again
« Reply #8 on: October 24, 2008, 07:13:31 pm »
Jesse, that's looking really good to me. If I did anything at all, it might be a few scrapes just past midlimb on both sides, but no problems really that I can see. Looks like it's gonna be a nice'un.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline Jesse

  • Member
  • Posts: 2,129
Re: Tiller check again
« Reply #9 on: October 24, 2008, 07:34:56 pm »
Thanks Hillbilly I think your right. I might just take a few more scrapes off that area. I say scrapes but actually I'm tillering with a sander at this point.   
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline Jesse

  • Member
  • Posts: 2,129
Re: Tiller check again
« Reply #10 on: October 24, 2008, 07:56:12 pm »
Here she is 48# at 25" 2 or 3 more inches left     Any more advise?
« Last Edit: October 24, 2008, 07:59:23 pm by Jesse-S »
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline El Destructo

  • Member
  • Posts: 8,078
  • Longhaired Crippled Hippie Biker And Proud Of It!!
    • Desert Sportz Primitive Archery
Re: Tiller check again
« Reply #11 on: October 24, 2008, 08:53:36 pm »
                         Stain it....Paint it....seal it....whatever....and put a Grip on it....and shoot the Crap outa it!!!!

                                                               I think you have nailed it this time......
Logged
As a species we're fundamentally insane. Put more than two of us in a room, we pick sides and start dreaming up ways to kill one another.Why do you think we invented politics and religion.
Think HEALTHCARE Is Expensive Now,Wait Till It's FREE
Do Or Do Not,There Is No TRY
2024...We Will Overcome

Offline DanaM

  • Member
  • Posts: 9,211
Re: Tiller check again
« Reply #12 on: October 24, 2008, 09:34:16 pm »
Quote from: Jesse-S on October 24, 2008, 07:56:12 pm
Here she is 48# at 25" 2 or 3 more inches left     Any more advise?

Send it back to me ;D Hows that fer advice :D Looks really nice jesse I think your right where ya wanna be :)
Wife and I aren't going to make down, too much going on at work, Hope you and Angie have fun on your vacation.

BTW the stave is Hard Maple or Sugar Maple, Acer Saccrum or something like that anyway
Logged
"Prosperity is a way of living and thinking, and not just money or things. Poverty is a way of living and thinking, and not just a lack of money or things."

Manistique, MI

Offline sailordad

  • Member
  • Posts: 5,045
Re: Tiller check again
« Reply #13 on: October 24, 2008, 09:44:29 pm »
ya you better start shooting that bow,you keep sanding on it and your gonna wish you had started shooting it.

or if you dont want to,just send it my way and i'll shoot it for ya
nice job ;)
                                                                        tim
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline Ryano

  • Member
  • Posts: 3,578
  • Ryan O'Sullivan, North Western Pennsylvania
Re: Tiller check again
« Reply #14 on: October 24, 2008, 10:46:05 pm »
Looks like a sweet bow Jesse. I'm with everyone else looks good from here.
Logged
Its November, I'm gone hunt'in.......
Osage is still better.....
Pages: [1] 2 3
« previous next »