Author Topic: Basswood shafts  (Read 3151 times)

0 Members and 1 Guest are viewing this topic.

Offline JW_Halverson

  • Member
  • Posts: 11,917
Basswood shafts
« on: October 08, 2008, 11:45:37 am »
Once in a while I get the urge to build ridiculously light arrows.  This latest mental spasm led me to a dealer selling basswood arrowshafts.  He recommends a couple dips in Minwax Wood Hardener for added strength.  Basswood has nearly no grain, woodcarvers love it because it does not warp, shift, crack, check, or vary in density...sounds like it should resist warping.  Does anyone have any experience with basswood shafting?
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Basswood shafts
« Reply #1 on: October 08, 2008, 12:01:31 pm »
Nope, no experience with it.....but it can't be any weaker than phrag (which I use sometimes).  I'd go ahead and try it.  Do you have a spine tester?  You might have to make 1/2" diameter shafts (or larger) to get the spine you need.
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline JW_Halverson

  • Member
  • Posts: 11,917
Re: Basswood shafts
« Reply #2 on: October 08, 2008, 12:14:03 pm »
The dealer says they spine like any other wood, 23/64ths diameter.  As for a spine tester, no, I don't have one.  If you send me yours I will promise to send it right back as soon as I am done with it. O:)
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Basswood shafts
« Reply #3 on: October 08, 2008, 12:26:35 pm »
Heheheh..... ;D  I'm sure you would return my spine tester....but I'd probably have to buy another one after a couple days without it.  I'm addicted to the darn thing.

23/64's is about 3/8".  I guess that would do for spines less than 50# (but I'm just guessing).
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr