Help, have i messed up..new pics/problems

[sailordad]

i would take some tb2 and mix in some sawdust and fill in the gaps, i did this on a little osage bow that i mad ( sliver ) i had a huge hunk missing right on a top edge of a limb and ive put about 500 arrow thru it now and havent had a problem

good luck, you can make it work just be patient

                                                                               tim

                                                                                       

[Pappy]

If it is just floor tillered ,most of it will probably be gone by the time you finish tillering,I dout it
will cause any problem,just give it a little character. I guess you could fill it but I wouldn't
untill I was finished tillering. 
   Pappy

[Mark Smeltzer]

I think what Pappy said is right on, if it's only floor tillered waite and see what you end up with befor you start tring to sand it out.

Mark

[newknapper]

If it is just floor tillered ,most of it will probably be gone by the time you finish tillering,I dout it
will cause any problem,just give it a little character. I guess you could fill it but I wouldn't
untill I was finished tillering. 
   Pappy

Thanks guys for all the help, I really would like for this one to work for me.

[Papa Matt]

New, I think it will work. Just do like they say and tiller it on out, then depending on how much if a gouge you still have (maybe none) you can decide whether to fill it or sand it out. You're doing OK.

~~Matt