Author Topic: Did a little Calf creekin today.  (Read 14314 times)

0 Members and 1 Guest are viewing this topic.

Offline D. Tiller

  • Member
  • Posts: 3,507
  • Go ahead! Bend that stick! Make my day!!!
    • Whidbey Island Soap Co.
Re: Did a little Calf creekin today.
« Reply #30 on: August 22, 2008, 01:43:34 am »
Alright Paul! I want a side profile!!! I want to see how thin you are gettin those suckers. Made a lancelot this evening but its humpy. You have got to show me how to get them thin one of these days!!!! URRRR!!!!
“People are less likely to shoot at you if you smile at them” - Mad Jack Churchill

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Did a little Calf creekin today.
« Reply #31 on: August 22, 2008, 01:49:21 am »
OK, I'll do it. But I warn you, thiers a thick spot on both of em ;D.
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline GregB

  • Member
  • Posts: 4,079
  • Greg Bagwell
Re: Did a little Calf creekin today.
« Reply #32 on: August 22, 2008, 09:24:20 pm »
I don't do any knappin', but I sure do appreciate all the work and skill you guys show in these points! Those are some purty points Cowboy! :)
Greg

A rich person can be poor monetarily, the best things in life are free...

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Did a little Calf creekin today.
« Reply #33 on: August 22, 2008, 10:33:30 pm »
Thanks Greg! It's deffinantly a learned process :).
 OK, D - here's the side pic's. I warned you they had thick spots ;). Thier not all that thin by any primitive's standard but I'll be working on that - then deeeep notches ;D.

[attachment deleted by admin]
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline D. Tiller

  • Member
  • Posts: 3,507
  • Go ahead! Bend that stick! Make my day!!!
    • Whidbey Island Soap Co.
Re: Did a little Calf creekin today.
« Reply #34 on: August 23, 2008, 03:37:45 am »
HA!!!! I knew it. I'm not as bad as I thought! YIPPPEEEE!!!!!!  ;D

I like them though! Discovered something while knaping today. Always remove the humps first before trying for pattern flaking! Been trying to do both and ended up with points that where humpy here and humpy there. Got my first good one today!
“People are less likely to shoot at you if you smile at them” - Mad Jack Churchill

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Did a little Calf creekin today.
« Reply #35 on: August 23, 2008, 11:41:32 am »
Congrats! Yeah, you wanna take off your big thinning flakes early in the process so your not breaking your work in half later on.
When you come upon a track or trail you do not know, follow it to the point of knowing.

Dingleberry

  • Guest
Re: Did a little Calf creekin today.
« Reply #36 on: August 25, 2008, 01:17:30 pm »
Killer points Paul,

The TN Classic "Johnstone Champion" strikes again ;D

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Did a little Calf creekin today.
« Reply #37 on: August 25, 2008, 02:01:08 pm »
Thank ya much Jonathen ;D.
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Did a little Calf creekin today.
« Reply #38 on: August 25, 2008, 02:09:49 pm »
Paul, I remember a few years back seeing a photo of an extinct bison skull somebody found that had a Calf Creek point buried in it. I remember that the archy's were surprised, they always thought that the Calf Creek type was a knife, but to stick through a bison skull, it would've had to have been on the end of an atlatl dart.
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Did a little Calf creekin today.
« Reply #39 on: August 25, 2008, 02:11:58 pm »
Yeah, I read somewhere that they've decided that they were indeed atlatl points. May have had something to do with that skull.
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline D. Tiller

  • Member
  • Posts: 3,507
  • Go ahead! Bend that stick! Make my day!!!
    • Whidbey Island Soap Co.
Re: Did a little Calf creekin today.
« Reply #40 on: August 25, 2008, 03:14:08 pm »
They must have been a bit smaller than the points you made. How big where they? I will have to try my hand at it myself. I be the large ones where lance points while the smaller ones where atlatl points.
“People are less likely to shoot at you if you smile at them” - Mad Jack Churchill

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Did a little Calf creekin today.
« Reply #41 on: August 25, 2008, 03:18:31 pm »
Tiller, that one was big, at least as big as Pauls, maybe bigger. I think a big heavy point on a dart would be the ticket for big mean critters.
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.