« previous next »
Pages: [1] 2

Author Topic: Osage Board Bow  (Read 10489 times)

0 Members and 1 Guest are viewing this topic.

Offline Key

  • Member
  • Posts: 190
Osage Board Bow
« on: July 23, 2008, 05:09:38 pm »
I have been working on this osage board bow. It is hickory backed, handle is cherry. I should have if finished in a couple of days and I will post a picture of it on this same thread than.


[attachment deleted by admin]
Logged
Roger

Offline Key

  • Member
  • Posts: 190
Re: Osage Board Bow
« Reply #1 on: July 23, 2008, 05:12:36 pm »
Handle is small, hope it doesn't pop off :-[

[attachment deleted by admin]
Logged
Roger

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Osage Board Bow
« Reply #2 on: July 23, 2008, 05:20:09 pm »
She looks good so far, Roger. Hickory backed osage makes a very good bow. Looks like the riser is sitting far enough above the belly plane to be safe. Usually it when the riser and belly are on the same plane is when the handle pops off.      Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Papa Matt

  • Guest
Re: Osage Board Bow
« Reply #3 on: July 23, 2008, 05:20:42 pm »
Looks like a nice piece. Handle should be alright, it looks thick enough so as not to allow any bend. Poundage?

~~Matt
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Osage Board Bow
« Reply #4 on: July 23, 2008, 05:30:10 pm »
Looks very nice so far. Your handle won't pop off, as long as you tiller it so it doesn't bend through the handle.
Logged

Offline Key

  • Member
  • Posts: 190
Re: Osage Board Bow
« Reply #5 on: July 23, 2008, 05:55:19 pm »
I will be shooting for 55 to 58 when I am finished with her.
Logged
Roger

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Osage Board Bow
« Reply #6 on: July 23, 2008, 06:22:09 pm »
55# to 60# should be no problem. What are the dimensions?     Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Key

  • Member
  • Posts: 190
Re: Osage Board Bow
« Reply #7 on: July 23, 2008, 06:52:22 pm »
62" ntn, 1 1/4 at the fades and the tips are 1/2".
Logged
Roger

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Osage Board Bow
« Reply #8 on: July 23, 2008, 06:57:53 pm »
No problem achieving that weight with this bow...unless, maybe :o ::)   You could make the limb tips narrower but leave them the same thickness. This will reduce the physical weight without reducing the strength or dropping the bows draw weight. By reducing the physical weight of the tips you will increase the speed and get rid of most, if not all hand shock.       Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Key

  • Member
  • Posts: 190
Re: Osage Board Bow
« Reply #9 on: July 25, 2008, 02:52:37 pm »
I got her finished and shot about 100 arrows so far.

[attachment deleted by admin]
Logged
Roger

Offline Key

  • Member
  • Posts: 190
Re: Osage Board Bow
« Reply #10 on: July 25, 2008, 02:54:02 pm »
Braced

[attachment deleted by admin]
Logged
Roger

Offline Key

  • Member
  • Posts: 190
Re: Osage Board Bow
« Reply #11 on: July 25, 2008, 02:54:59 pm »
Grip

[attachment deleted by admin]
Logged
Roger

Offline The Burnt Hill Archer

  • Member
  • Posts: 513
  • Potter County, Pennsylvania
Re: Osage Board Bow
« Reply #12 on: July 26, 2008, 09:48:39 pm »
very nice! i like the grip particularly.
Logged
stalk softly, and carry a bent stick.

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: Osage Board Bow
« Reply #13 on: July 27, 2008, 12:37:02 am »
Looks nice. Good tiller and a simple design. Just how I like them.  Justin
Logged
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline Coo-wah-chobee

  • Member
  • Posts: 2,503
Re: Osage Board Bow
« Reply #14 on: July 27, 2008, 12:42:46 am »
Looks very nice Roger. Like Justin said "Nice an simple !" ;).......bob
Logged
Pages: [1] 2
« previous next »