« previous next »
Pages: [1] 2 3 ... 5

Author Topic: My first osage effort  (Read 22880 times)

0 Members and 4 Guests are viewing this topic.

Offline cracker

  • Member
  • Posts: 3,123
My first osage effort
« on: July 13, 2008, 10:47:34 am »
Okay, here ia my first osage effort. It is 68 inches over all, 66 inches N T N, 1 1/2 inches wide, 9/16 at the nocks, 6 inch handle. It has a kink just below the handle and a funny looking  knot in the middle of the kink. look it over and let me know what you think.

Because if pic size there will be several post to show all pics.
Ronnie

[attachment deleted by admin]
Logged
If we can't help each other what is the point of being here?

Offline cracker

  • Member
  • Posts: 3,123
Re: My first osage effort
« Reply #1 on: July 13, 2008, 10:49:12 am »
pic 2

[attachment deleted by admin]
Logged
If we can't help each other what is the point of being here?

Offline cracker

  • Member
  • Posts: 3,123
Re: My first osage effort
« Reply #2 on: July 13, 2008, 10:50:04 am »
pic 3

[attachment deleted by admin]
Logged
If we can't help each other what is the point of being here?

Offline cracker

  • Member
  • Posts: 3,123
Re: My first osage effort
« Reply #3 on: July 13, 2008, 10:51:07 am »
pic 4

[attachment deleted by admin]
Logged
If we can't help each other what is the point of being here?

Offline cracker

  • Member
  • Posts: 3,123
Re: My first osage effort
« Reply #4 on: July 13, 2008, 10:52:07 am »
pic 5

[attachment deleted by admin]
Logged
If we can't help each other what is the point of being here?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: My first osage effort
« Reply #5 on: July 13, 2008, 12:14:06 pm »
I would soak that spot with super glue and keep on keeping on with what you are doing.  ;)     Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: My first osage effort
« Reply #6 on: July 13, 2008, 12:15:44 pm »
...it does look like you could work a bit more on the outside 2/3 of each limb and leave the inside 1/3(near the fades) alone for a while.      Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline cracker

  • Member
  • Posts: 3,123
Re: My first osage effort
« Reply #7 on: July 13, 2008, 01:37:11 pm »
Quote from: Pat B on July 13, 2008, 12:15:44 pm
...it does look like you could work a bit more on the outside 2/3 of each limb and leave the inside 1/3(near the fades) alone for a while.      Pat
Thanks Pat I was thinking the same thing I just wanted a little confirmation.The kink messes with me.
Thanks Ronnie
Logged
If we can't help each other what is the point of being here?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: My first osage effort
« Reply #8 on: July 13, 2008, 02:34:21 pm »
Ronnie, Kinks mess with everyones minds when it comes to tillering. ;)  I find that if I squint my eyes and look at the overall shape, instead of the details I can see the correct bend of the bow.  The nice thing about osage is it is more forgiving than other bow woods. You still should go about bow building using the proper methods.  ;)
   Work the outer areas of the limbs, exercise the wood well and move on to the next step.
 
 If you don't mind, I will move this to "Bows" so you can get more comments and advice.     Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Ryano

  • Member
  • Posts: 3,578
  • Ryan O'Sullivan, North Western Pennsylvania
Re: My first osage effort
« Reply #9 on: July 13, 2008, 11:34:57 pm »
If you don't mind me asking. What draw length/weight are you looking for? At the dimensions you have now your way over built for your average Osage bow. For a 28" or less draw I wouldn't go over 64" ntn with Osage, and 1 1/2" wide is pretty generous as well depending on what kind of draw weight your after, and 9/16" at the tips will jar your teeth out. 3/8" at the nocks is plenty wide for osage. Good luck. Looks like your getting it bending pretty good.
Logged
Its November, I'm gone hunt'in.......
Osage is still better.....

Online Pappy

  • Global Moderator
  • Member
  • Posts: 32,118
  • if you have to ask you wouldn't understand ,Tenn.
Re: My first osage effort
« Reply #10 on: July 14, 2008, 06:37:59 am »
Looking good so far,I am with Ryan it is probably a little overbuilt,but I do that a lot myself.
I am looking more for longevity than performance anyway.  :) Not that them built right on
the edge won't last I just don't push the limit much. Keep us posted as you move along. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline cracker

  • Member
  • Posts: 3,123
Re: My first osage effort
« Reply #11 on: July 14, 2008, 06:23:59 pm »
Ryano and Pappy
   Glad to hear from you guys. I kinda had 60#at 28 in mind.The reason for having it so wide is that the vertical grain wanders from the center of the handle to very near the edge of the limb in a place or two before winding up in the center of the nock. I'm not very familiar with osage so I thought this would be an error on the safe side.This is all an experiment to me so if you guys got a recomendation I'll try it.
Thanks for looking.R.C.
Logged
If we can't help each other what is the point of being here?

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: My first osage effort
« Reply #12 on: July 14, 2008, 08:17:14 pm »
Looking good so far Ronnie, your taking your time and that's good :). Hope she holds up for ya, and if not well you know ::) :).
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline cracker

  • Member
  • Posts: 3,123
Re: My first osage effort
« Reply #13 on: July 14, 2008, 08:34:40 pm »
Thanks Cowboy
  It's always good to have a plan B.
Ron
Logged
If we can't help each other what is the point of being here?

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: My first osage effort
« Reply #14 on: July 14, 2008, 08:44:50 pm »
Looks like you need to get some bending mid limb on -both limbs. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: [1] 2 3 ... 5
« previous next »