Author Topic: wild rose shafts  (Read 5832 times)

0 Members and 1 Guest are viewing this topic.

Offline recurve shooter

  • Member
  • Posts: 2,325
wild rose shafts
« on: July 09, 2008, 06:05:44 pm »
hi. i think i jist found some wild rose.  ;D it is a long brier/thorn/horibly painfull vine that starts on the ground and climbs upward, through the trees and stuff. i got some about a half inch to an inch at the bottom and am wondering how i  am suposed to turn these meat grindrs into arras. i guess you jist do like shoot shafts, only with leather gloves huh?
lets just shoot it

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: wild rose shafts
« Reply #1 on: July 09, 2008, 06:10:41 pm »
The thorns should come off pretty easy by rubbing them with the leather gloves. Then I would bundle the shoots you have and give them at least a few weeks to dry...a month would be better. Then scrape the bark and straighten them like other shoots.     Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: wild rose shafts
« Reply #2 on: July 09, 2008, 06:33:04 pm »
cool. got to get em to my workshop. (aka grandpa's house)this weekend. they are tough little vines/sprouts/shoots/briers whatevet they are. so they should make awsome arras. i'll let yall know how they come out. i've got stuff going smoothly  now. i'll put those up to dry this weekend and get down my sourwood and streighten and fletch them up, and by the time they all break i should be able to start on these. i like this.  ;D
lets just shoot it

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: wild rose shafts
« Reply #3 on: July 09, 2008, 08:23:21 pm »
If they are briers they may not make good arrows. Try one and see. Wrap the nock well so it doesn't split!  :o    Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: wild rose shafts
« Reply #4 on: July 09, 2008, 08:25:19 pm »
no, they aint briers, they are like a hardwood vine with lots of thorns on it. they are HARD. trust me. i had to cut em down with a kitchin knife.  ;D
lets just shoot it

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: wild rose shafts
« Reply #5 on: July 09, 2008, 09:17:22 pm »
If they are true vines, they're probably some kind of greenbriar.
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: wild rose shafts
« Reply #6 on: July 09, 2008, 09:24:49 pm »
i dont know, but i hope that they will be arrows soon.  ;D
lets just shoot it

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: wild rose shafts
« Reply #7 on: July 10, 2008, 12:22:20 am »
I have seen greenbriar big enough for arrows but I can't imagine it stiff enough.     Pat
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline recurve shooter

  • Member
  • Posts: 2,325
Re: wild rose shafts
« Reply #8 on: July 10, 2008, 12:35:31 am »
then this aint greenbriar. it is HARD.
lets just shoot it

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: wild rose shafts
« Reply #9 on: July 10, 2008, 12:37:47 am »
 8)
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: wild rose shafts
« Reply #10 on: July 10, 2008, 07:36:04 am »
Here's a couple different kinds of Smilax (greenbriar, catbriar, sawbriar.) Look anything like these or is it something different?



[attachment deleted by admin]
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.